Add to ORKGIn this research, the influence of milling time and sintering temperature on TiCreinforced iron composite formation by carbothermal reduction of hematite (Fe2O3) and anatase (TiO2) mixture was investigated. Mixtures of Fe2O3, TiO2 and graphite powders with composition of Fe-30%TiC were mechanically activated in a high energy ball mill at various milling times (0 hour-60 hours). X-ray diffraction (XRD) analysis of as-milled powder showed broadening of Fe2O3 peaks with disappearance of TiO2 and graphite peaks due to powder refinement and diffusion of graphite
Original article can be found at: http://www.ijmr.de/ijmr/ Copyright Carl Hanser Verlag [Full text o...
Titanium carbide has high hardness, resistance to oxidation and abrasion while iron aluminide has pr...
Fe-TiC composites containing varying amounts of TiC particles have been synthesized by casting route...
In this research, two different carbonaceous materials (Graphite:G and Petrocoke:P) were ...
The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturin...
Fe-based composites are found to be a promising material for automotive, process and chemical indust...
The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturin...
Fe-6.67 wt. %C and Fe-1 wt. %C powders were milled in a dual drive planetary mill for 40 h. It has b...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
The purpose of this study is to synthesize iron aluminide intermetallic composite with in situ part...
High-chromium white cast-iron specimens locally reinforced with TiC–metal matrix composites were suc...
The ratio of ilmenite (FeTiO3) to titanium dioxide (TiO2) was varied to synthesize Fe-TiC composites...
Steel metal matrix composites reinforced with titanium carbide particles (25 vol% ) can be industria...
In this research, synthesis of Fe-TiC nanocomposites from activated ilmenite concentrate and carbon ...
In this study, high-energy ball milling also called mechanical alloying (MA) was applied to synthesi...
Original article can be found at: http://www.ijmr.de/ijmr/ Copyright Carl Hanser Verlag [Full text o...
Titanium carbide has high hardness, resistance to oxidation and abrasion while iron aluminide has pr...
Fe-TiC composites containing varying amounts of TiC particles have been synthesized by casting route...
In this research, two different carbonaceous materials (Graphite:G and Petrocoke:P) were ...
The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturin...
Fe-based composites are found to be a promising material for automotive, process and chemical indust...
The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturin...
Fe-6.67 wt. %C and Fe-1 wt. %C powders were milled in a dual drive planetary mill for 40 h. It has b...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
The purpose of this study is to synthesize iron aluminide intermetallic composite with in situ part...
High-chromium white cast-iron specimens locally reinforced with TiC–metal matrix composites were suc...
The ratio of ilmenite (FeTiO3) to titanium dioxide (TiO2) was varied to synthesize Fe-TiC composites...
Steel metal matrix composites reinforced with titanium carbide particles (25 vol% ) can be industria...
In this research, synthesis of Fe-TiC nanocomposites from activated ilmenite concentrate and carbon ...
In this study, high-energy ball milling also called mechanical alloying (MA) was applied to synthesi...
Original article can be found at: http://www.ijmr.de/ijmr/ Copyright Carl Hanser Verlag [Full text o...
Titanium carbide has high hardness, resistance to oxidation and abrasion while iron aluminide has pr...
Fe-TiC composites containing varying amounts of TiC particles have been synthesized by casting route...