In-situ phosphorus-doped polysilicon emitters deposited on monocrystalline silicon substrates at a temperature of 627 °C and subjected to no additional high-temperature annealing are shown to be capable of giving Gummel numbers GEin excess of 1015 scm-4. Polysilicon emitters formed in this way have been used to produce superbeta transistors with performance comparable to the record levels recently reported for MIS emitter devices. In particular, commonemitter current gains β in excess of 30 000 have been obtained at low vcbvalues. Copyrigh
Silicon bipolar transistors have been fabricated with arsenic implanted or phosphorous diffused poly...
The fabrication and characterization of in situ-doped amorphous Si/sub 0.8/C/sub 0.2/ emitter transi...
The fabrication of the very high speed polysilicon emitter bipolar transistor and circuit with doubl...
A polysilicon emitter transistor has been fabricated in which the metallurgical base/emitter junctio...
In-situ boron-doped polysilicon has been used to form the emitter in p-n-p transistors. Various poly...
The effect of 900°C furnace annealing on transistors with in situ phosphorus-doped polysilicon emitt...
This thesis investigates the use of in-situ phosphorus doped polysilicon emitter contacts in deep su...
It was demonstrated that the common emitter current gain of bipolar transistors could be improved by...
The d.c. characteristics are computed for pnp polysilicon emitter transistors (PETs) in which a thin...
This thesis describes the results of an experimental and theoretical study of the physics of polysil...
Uniform arrays of sharp polysilicon held emitters have been fabricated in gridded configuration usin...
The experimental technology of processing arsenic-doped poly-silicon emitter RCA transistor is inves...
Des transistors bipolaires qui utilisent une couche de polysilicium doper de bore pour la base intri...
Polysilicon emitter vertical NPN transistors were fabricated in an attempt to create devices with ve...
The recent developments in rapid thermal processing in the past several years have shown it to have ...
Silicon bipolar transistors have been fabricated with arsenic implanted or phosphorous diffused poly...
The fabrication and characterization of in situ-doped amorphous Si/sub 0.8/C/sub 0.2/ emitter transi...
The fabrication of the very high speed polysilicon emitter bipolar transistor and circuit with doubl...
A polysilicon emitter transistor has been fabricated in which the metallurgical base/emitter junctio...
In-situ boron-doped polysilicon has been used to form the emitter in p-n-p transistors. Various poly...
The effect of 900°C furnace annealing on transistors with in situ phosphorus-doped polysilicon emitt...
This thesis investigates the use of in-situ phosphorus doped polysilicon emitter contacts in deep su...
It was demonstrated that the common emitter current gain of bipolar transistors could be improved by...
The d.c. characteristics are computed for pnp polysilicon emitter transistors (PETs) in which a thin...
This thesis describes the results of an experimental and theoretical study of the physics of polysil...
Uniform arrays of sharp polysilicon held emitters have been fabricated in gridded configuration usin...
The experimental technology of processing arsenic-doped poly-silicon emitter RCA transistor is inves...
Des transistors bipolaires qui utilisent une couche de polysilicium doper de bore pour la base intri...
Polysilicon emitter vertical NPN transistors were fabricated in an attempt to create devices with ve...
The recent developments in rapid thermal processing in the past several years have shown it to have ...
Silicon bipolar transistors have been fabricated with arsenic implanted or phosphorous diffused poly...
The fabrication and characterization of in situ-doped amorphous Si/sub 0.8/C/sub 0.2/ emitter transi...
The fabrication of the very high speed polysilicon emitter bipolar transistor and circuit with doubl...