Add to ORKGCuInGaSe2/CdS thin film solar cells were prepared by using a novel precursor obtained by depositing in sequence, on top of a Mo covered soda lime glass, In2Se3, Ga2Se3 and Cu. A subsequent few minutes selenization of the precursor in a selenium vapor is sufficient to obtain a good quality CuInGaSe2 film
A process for the preparation of CuInGaSe2 thin film useable as an absorber layer in CuInGaSe2/CdS f...
CuInGaSe2/CdS thin film solar cells with efficiency larger than 14% have been prepared by a novel pr...
This report describes the I-III-VI2 compounds that are developing into a promising material to meet ...
Abstract: CuInGaSe2/CdS thin film solar cells were prepared by using a novel precursor obtained by ...
CuInGaSe2/CdS thin film solar cells have been prepared by using only sputtering and selenization in...
A novel precursor suitable to prepare uniform CuInGaSe2 thin films on an 1 inch2 area has been devel...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
Cu(In 1-xGa x)(Se 1-yS y) 2 (CIGSS) thin films were prepared at the FSEC photovoltaic materials lab ...
16.2% efficient Cu(In,Ga)Se2/CdS solar cells were prepared with a process which uses only sputtering...
AbstractCu(In,Ga)Se2 (CIGS) thin films were prepared by directly sputtering Cu(In,Ga)Se2 quaternary ...
A process for the preparation of a CuInGaSe2 thin film useable as an absorber layer in CulnGaSe2/CdS...
AbstractCopper indium selenium (CIS) and copper indium gallium selenium (CIGS) thin films were prepa...
CuInSe2/CdS Thin Film Solar Cells with a conversion efficiency of 9% have been obtained by preparing...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
A process for the preparation of CuInGaSe2 thin film useable as an absorber layer in CuInGaSe2/CdS f...
CuInGaSe2/CdS thin film solar cells with efficiency larger than 14% have been prepared by a novel pr...
This report describes the I-III-VI2 compounds that are developing into a promising material to meet ...
Abstract: CuInGaSe2/CdS thin film solar cells were prepared by using a novel precursor obtained by ...
CuInGaSe2/CdS thin film solar cells have been prepared by using only sputtering and selenization in...
A novel precursor suitable to prepare uniform CuInGaSe2 thin films on an 1 inch2 area has been devel...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
Cu(In 1-xGa x)(Se 1-yS y) 2 (CIGSS) thin films were prepared at the FSEC photovoltaic materials lab ...
16.2% efficient Cu(In,Ga)Se2/CdS solar cells were prepared with a process which uses only sputtering...
AbstractCu(In,Ga)Se2 (CIGS) thin films were prepared by directly sputtering Cu(In,Ga)Se2 quaternary ...
A process for the preparation of a CuInGaSe2 thin film useable as an absorber layer in CulnGaSe2/CdS...
AbstractCopper indium selenium (CIS) and copper indium gallium selenium (CIGS) thin films were prepa...
CuInSe2/CdS Thin Film Solar Cells with a conversion efficiency of 9% have been obtained by preparing...
Cu(In,Ga)Se2 (CIGS)/CdS thin-film solar cells have reached, at laboratory scale, an efficiency highe...
A process for the preparation of CuInGaSe2 thin film useable as an absorber layer in CuInGaSe2/CdS f...
CuInGaSe2/CdS thin film solar cells with efficiency larger than 14% have been prepared by a novel pr...
This report describes the I-III-VI2 compounds that are developing into a promising material to meet ...