Add to ORKGModifications and upgrades to the hydraulic flume facility in the Environmental Fluid Mechanics and Hydraulics Laboratory (EFM&H) at Bucknell University are described. These changes enable small-scale testing of model marine hydrokinetic(MHK) devices. The design of the experimental platform provides a controlled environment for testing of model MHK devices to determine their effect on localsubstrate. Specifically, the effects being studied are scour and erosion around a cylindrical support structure and deposition of sediment downstream from the device
The Lower Mississippi River (LMR), since the creation of the Mississippi River and Tributaries (MR&T...
A solution to the problem of AMB control with reduced electrical power losses will be presented in t...
Heavy vehicles require tires which can withstand extreme loads while maintaining control, delivering...
The ability to predict the hydrodynamic force exerted on floating bodies plays a critical role in cr...
Final report and prototype photo for Project 23 of ME450, Fall 2009 semester.Excessive level of nitr...
Tetrachloroethene (PCE) and trichloroethene (TCE) form dense non-aqueous phase liquids (DNAPLs), whi...
The Fluid Power area handles a profound change to achieve the highest efficiency levels requested by...
Impinging jets are commonly used to enhance heat transfer in modern gas turbine engines. Impinging j...
This study has been conducted in order to present the design, construction, and validation of a stat...
Heat transfer and flow characteristics inside a typical can-annulus gas turbine combustor are invest...
An experimental and analytical study of a microchannel ammonia-water desorber was conducted in this ...
The F/A-18A aircraft has experienced engine stalls at high angles-of-attack and yaw flight condition...
This thesis describes the development and application of hydrodynamic modulation voltammetric (HMV) ...
The Laminar flame speed is an essential parameter in measuring turbulent premixed combustion applied...
As part of a fluid mechanics laboratory, there should be an experiment that demonstrates the proper ...
The Lower Mississippi River (LMR), since the creation of the Mississippi River and Tributaries (MR&T...
A solution to the problem of AMB control with reduced electrical power losses will be presented in t...
Heavy vehicles require tires which can withstand extreme loads while maintaining control, delivering...
The ability to predict the hydrodynamic force exerted on floating bodies plays a critical role in cr...
Final report and prototype photo for Project 23 of ME450, Fall 2009 semester.Excessive level of nitr...
Tetrachloroethene (PCE) and trichloroethene (TCE) form dense non-aqueous phase liquids (DNAPLs), whi...
The Fluid Power area handles a profound change to achieve the highest efficiency levels requested by...
Impinging jets are commonly used to enhance heat transfer in modern gas turbine engines. Impinging j...
This study has been conducted in order to present the design, construction, and validation of a stat...
Heat transfer and flow characteristics inside a typical can-annulus gas turbine combustor are invest...
An experimental and analytical study of a microchannel ammonia-water desorber was conducted in this ...
The F/A-18A aircraft has experienced engine stalls at high angles-of-attack and yaw flight condition...
This thesis describes the development and application of hydrodynamic modulation voltammetric (HMV) ...
The Laminar flame speed is an essential parameter in measuring turbulent premixed combustion applied...
As part of a fluid mechanics laboratory, there should be an experiment that demonstrates the proper ...
The Lower Mississippi River (LMR), since the creation of the Mississippi River and Tributaries (MR&T...
A solution to the problem of AMB control with reduced electrical power losses will be presented in t...
Heavy vehicles require tires which can withstand extreme loads while maintaining control, delivering...