Hydrogen attack in commercial quenched and tempered 2 1/4 Cr - 1 Mo steel was studied. The sensitive dilatometer developed in the past was used. The Nelson curve for 2 1/4 Cr - 1 Mo steel has been updated, and both the curve and rationale for the curve are included in an appendix. (DLC
The linearly increasing stress test (LIST) was used to study the influence of hydrogen on 3.5NiCrMoV...
The linearly increasing stress test (LIST), together with cathodic hydrogen charging, was used to st...
Instrumented Charpy test was conducted on small sized specimen of 21/4Cr-1Mo ste...
High temperature hydrogen attack (HTHA) is a form of surface decarburization, internal decarburizati...
Four carbon steels of approximately equivalent carbon content and varying mainly in the method of st...
Four normalized carbon steels made in different ways (Si-killed, Al-killed, REM-treated, and electro...
The objective of this work is to establish the atomic processes by which the hydrogen attack of pres...
A modified test technique has been developed in this program to overcome difficulties in assessing t...
High-temperature, high-pressure hydrogen attack is a degradation mechanism that threatens the integr...
AbstractHydrogen penetration into the bulk of steel is a risk during the whole process of the manufa...
ABSTRACT: Factors influencing hydrogen induced cracking of transmission pipeline steels are describe...
Literature survey has been performed for a compendium of mechanical properties of carbon and low all...
The commercial steels 1008, X65, X70, 4140 and 4145H were subjected to linearly increased stress tes...
The aim of this work is the evaluation of the hydrogen effect on the J-integral parameter. It is wel...
As a result of work done in the last twenty years or so, it is now accepted that hydrogen can cause...
The linearly increasing stress test (LIST) was used to study the influence of hydrogen on 3.5NiCrMoV...
The linearly increasing stress test (LIST), together with cathodic hydrogen charging, was used to st...
Instrumented Charpy test was conducted on small sized specimen of 21/4Cr-1Mo ste...
High temperature hydrogen attack (HTHA) is a form of surface decarburization, internal decarburizati...
Four carbon steels of approximately equivalent carbon content and varying mainly in the method of st...
Four normalized carbon steels made in different ways (Si-killed, Al-killed, REM-treated, and electro...
The objective of this work is to establish the atomic processes by which the hydrogen attack of pres...
A modified test technique has been developed in this program to overcome difficulties in assessing t...
High-temperature, high-pressure hydrogen attack is a degradation mechanism that threatens the integr...
AbstractHydrogen penetration into the bulk of steel is a risk during the whole process of the manufa...
ABSTRACT: Factors influencing hydrogen induced cracking of transmission pipeline steels are describe...
Literature survey has been performed for a compendium of mechanical properties of carbon and low all...
The commercial steels 1008, X65, X70, 4140 and 4145H were subjected to linearly increased stress tes...
The aim of this work is the evaluation of the hydrogen effect on the J-integral parameter. It is wel...
As a result of work done in the last twenty years or so, it is now accepted that hydrogen can cause...
The linearly increasing stress test (LIST) was used to study the influence of hydrogen on 3.5NiCrMoV...
The linearly increasing stress test (LIST), together with cathodic hydrogen charging, was used to st...
Instrumented Charpy test was conducted on small sized specimen of 21/4Cr-1Mo ste...
DOI
Add to ORKG