Performance Analysis of Wavelength Division Multiplexed Passive Optical Network with implementation of DCF

In conventional C-band implementation with DCF WDM-PON prototype are using bit rate of 20Gb/s for upstream and 20Gb/s for downstream hence power budget chart hold good for both upstream and downstream. This prototype delivers good Q-Factor and tolerable BER for 40Km that is considerably higher than Conventional architecture. Caused by the broadband services, bandwidth demand is growing increasingly and resulting in successive increase in the size of produced traffic in our communication networks. It forces us to implement future admittance network in our zones. This paper mainly focused and explained the design and formation of a passive optical network (PON). The basic approach of this proposal is to build a invented impression based on simulation approach that will allow us to analyze in deep on fiber to the home systems and optimize the designed system. To design above said system, different elements of the system will be studied after that optical fiber will be studied in detail. FTTx networks along with point-to-point and point-to-multipoint architectures will be followed by theoretical part of the network, moving to escalating at length on PON and accomplish which of its technologies will be the best suitable for future. Finally, simulation tool will meet the project necessities will be selected, the design of PON system will be accomplished and in the simulation results which explain that the network is possible