New techniques for analysis of organic pollutants in drinking water

An abstractor packing prepared by coating Chromosorb G AW/DMCS with copper(II) chloride was effective for removal of amines from gas-chromatographic streams, but it did not affect the chromatographic behavior of nonamine compounds. By using pre-columns packed with the abstractor packing, solventless chromatograms were obtained for samples in pyridine. A method was developed for determining haloforms in drinking water by sorption of the haloforms on columns packed with acetylated XAD-2. A pre-column of the abstractor packing was used to remove the pyridine solvent from the samples containing the haloforms concentrated from waters. Detection limits for the four chloro-, bromo- haloforms in a 100-ml water sample using an electron capture detector were below 1 ppB. Addition of ascorbic acid to chlorinated waters was effective for stopping the production of haloforms. Design of the inlet allowed samples to be introduced to the capillary column in a Tracor model 550 gas chromatograph with or without splitting of the carrier-gas stream. An exit splitter was implemented that carried the effluent from the capillary column to two detectors. The capillary-column system was applied to the analysis of trace components in complex mixtures. Small columns packed with Florisil were used to fractionate mixtures of organic compounds by gravity-flow liquid chromatography. Three fractions of organic compounds were collected from the Florisil columns. The recovery and elution behavior of many organic compounds was investigated. Organic compounds from fifteen waters were fractionated on Florisil