Add to ORKGMeasurements of surface roughness were made on a large number of grazing incidence mirrors delivered for use at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory. The measurements were made with a WYKO optical profiler using a 2.5X and a 10X objective and analyzed with our PROFILE code to generate an average periodogram representation for each surface. The data is presented in the form of representative profiles with all of the periodogram curves arranged according to figure type. Analysis of the periodograms allows one to compute bandwidth-limited values for RMS roughness and slope, to provide valuable feedback information to manufacturers regarding compliance with specifications, and to predict the performance...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
A recently-developed long-trace surface profiling instrument (LTP) is now in operation in our labora...
The effective utilization of synchrotron radiation (SR) from high-brightness sources requires the us...
Modern third generation storage rings, require state-of-the-art grazing incidence x-ray optics, in o...
Image distortions produced by a cylinder mirror at the National Synchrotron Light Source are compare...
As early as 1989 [1,2], E. Church and P. Takacs presented a systematic theoretical foundation for ch...
The Optics Division is currently in the research phase of producing grazing-incidence mirrors to be ...
Recent years have seen an almost explosive growth in the number of beam lines on new and existing sy...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
Surface topography and light scattering were measured on 15 samples ranging from those having smooth...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
Surface topography and light scattering were measured on 15 samples ranging from those having smooth...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
A recently-developed long-trace surface profiling instrument (LTP) is now in operation in our labora...
The effective utilization of synchrotron radiation (SR) from high-brightness sources requires the us...
Modern third generation storage rings, require state-of-the-art grazing incidence x-ray optics, in o...
Image distortions produced by a cylinder mirror at the National Synchrotron Light Source are compare...
As early as 1989 [1,2], E. Church and P. Takacs presented a systematic theoretical foundation for ch...
The Optics Division is currently in the research phase of producing grazing-incidence mirrors to be ...
Recent years have seen an almost explosive growth in the number of beam lines on new and existing sy...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
Surface topography and light scattering were measured on 15 samples ranging from those having smooth...
In the early 1990s, Church and Takacs pointed out that the specification of surface figure and finis...
Surface topography and light scattering were measured on 15 samples ranging from those having smooth...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
The design and evaluation of the expected performance of optical systems requires sophisticated and ...
A recently-developed long-trace surface profiling instrument (LTP) is now in operation in our labora...