A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The magnet produces a peak field of 6 kGauss at a current of 20,000 Amperes within a 0.4 msec long pulse. The field uniformity obtained is ..delta..B/B<0.2% out to 3.8 cm from the copper septum. Power enters the magnet from the center resulting in very simple ends and the magnet incorporates at 0.5 cm steel guard which reduces the field to <1.4 Gauss in the zero-field region. The total septum thickness is 1.3 cm. The vacuum enclosure doubles as the stacking fixture for the magnet laminations allowing easy assembly of a magnet with a 50 m radius of curvature
A dipole septum magnet without a material septum has been designed and tested as part of a fast beam...
This report consists of three parts. The first part describes a numerical analysis method for the el...
A three channel septum magnet has been designed to service the three primary beam lines at the exit ...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
A pulsed septum magnet is used to inflect the 200 MeV beam into the booster synchrotron at the Natio...
summary The construction of the pulsed septum magnets and their power supply used in the 8 GeV beam ...
A thin (2-mm) eddy-current pulsed septum magnet was developed for use in the Advanced Photon Source ...
The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumu...
Three septum magnets will be operated at a repetition-rate of 2 Hz. Two of the septum magnets are id...
The PEP-II B-Factory is presently engaged design and fabrication of several unique magnets referred ...
Magnetic field calculations have been performed using the POISSON code to assist in the design of a ...
A novel design septum for Japan Proton Accelerator Research Center (J-PARC) delivers high intensity ...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
A dipole "septum" magnet without a material septum has been designed and tested as part of a fast be...
Each of the two slow-extracted proton beams of the CERN 400 GeV Super Proton Synchrotron can be divi...
A dipole septum magnet without a material septum has been designed and tested as part of a fast beam...
This report consists of three parts. The first part describes a numerical analysis method for the el...
A three channel septum magnet has been designed to service the three primary beam lines at the exit ...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
A pulsed septum magnet is used to inflect the 200 MeV beam into the booster synchrotron at the Natio...
summary The construction of the pulsed septum magnets and their power supply used in the 8 GeV beam ...
A thin (2-mm) eddy-current pulsed septum magnet was developed for use in the Advanced Photon Source ...
The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumu...
Three septum magnets will be operated at a repetition-rate of 2 Hz. Two of the septum magnets are id...
The PEP-II B-Factory is presently engaged design and fabrication of several unique magnets referred ...
Magnetic field calculations have been performed using the POISSON code to assist in the design of a ...
A novel design septum for Japan Proton Accelerator Research Center (J-PARC) delivers high intensity ...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
A dipole "septum" magnet without a material septum has been designed and tested as part of a fast be...
Each of the two slow-extracted proton beams of the CERN 400 GeV Super Proton Synchrotron can be divi...
A dipole septum magnet without a material septum has been designed and tested as part of a fast beam...
This report consists of three parts. The first part describes a numerical analysis method for the el...
A three channel septum magnet has been designed to service the three primary beam lines at the exit ...