Magnetic field calculations have been performed using the POISSON code to assist in the design of a pulsed septum magnet for beam manipulation in the TeV I antiproton accumulator/debuncher system. Magnet current distributions are obtained from eddy current considerations relative to a pulsed half-sine wave of 1200 Hz. Magnet end effects are not considered here
A dipole "septum" magnet without a material septum has been designed and tested as part of a fast be...
The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumu...
In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster ...
This report consists of three parts. The first part describes a numerical analysis method for the el...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
A thin (2-mm) eddy-current pulsed septum magnet was developed for use in the Advanced Photon Source ...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
The stray field of eddy current septum magnets is analyzed theoretically and also simulated by a com...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
A pulsed septum magnet is used to inflect the 200 MeV beam into the booster synchrotron at the Natio...
A three channel septum magnet has been designed to service the three primary beam lines at the exit ...
The PEP-II B-Factory is presently engaged design and fabrication of several unique magnets referred ...
summary The construction of the pulsed septum magnets and their power supply used in the 8 GeV beam ...
Three septum magnets will be operated at a repetition-rate of 2 Hz. Two of the septum magnets are id...
It is the purpose of this report to describe the thinking and work that went into thoroughly underst...
A dipole "septum" magnet without a material septum has been designed and tested as part of a fast be...
The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumu...
In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster ...
This report consists of three parts. The first part describes a numerical analysis method for the el...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
A thin (2-mm) eddy-current pulsed septum magnet was developed for use in the Advanced Photon Source ...
A 2 meter curved pulsed septum magnet for use in the Fermilab Antiproton Source is described. The ma...
The stray field of eddy current septum magnets is analyzed theoretically and also simulated by a com...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
A pulsed septum magnet is used to inflect the 200 MeV beam into the booster synchrotron at the Natio...
A three channel septum magnet has been designed to service the three primary beam lines at the exit ...
The PEP-II B-Factory is presently engaged design and fabrication of several unique magnets referred ...
summary The construction of the pulsed septum magnets and their power supply used in the 8 GeV beam ...
Three septum magnets will be operated at a repetition-rate of 2 Hz. Two of the septum magnets are id...
It is the purpose of this report to describe the thinking and work that went into thoroughly underst...
A dipole "septum" magnet without a material septum has been designed and tested as part of a fast be...
The Advanced Photon Source (APS) consists of four separate machines: linac, booster, positron accumu...
In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster ...
DOI
Add to ORKG