The U5. 0 undulator design for the advanced light source at LBL

The U5.0 undulator, currently under design, is the first in a series of insertion devices planned for the Advanced Light Source at LBL. U5.0 parameters include a 5 cm period, 5 m length with a 0.837 T maximum field at a 14 mm gap. A hybrid configuration utilizing Nd-Fe-B permanent magnet material and Vanadium Permendur poles is used for the magnetic structure. Construction is modular with many pole assemblies attached to a pole mount, which in turn is fastened onto one of the backing beams. Vertical field integral correction at the ends is with permanent magnet rotators. The supports structure features a 4-post configuration, a rigid base with 3 kinematic floor supports and 2 rigid 5 m long backing beams that fit within the 2.4 m high accelerator enclosure. The drive system is computer controlled utilizing a stepper motor and shaft encode coupled to a roller-screw/nut and chain drive train. Vacuum chamber design is a rigid configuration with a 10 mm vertical by 218 mm horizontal aperture of 5.5 m length. Chamber fabrication features a two-piece welded chamber of 5083 H321 aluminum. Pumping is with ion and titanium sublimation pumps. 5 figs., 1 tab