The low-temperature heat capacity behavior of PuO/sub 2/ was found to be anomalous and irreproducible, changing slightly after every one of seven liquid helium coolings. Data obtained from a second series of liquid helium coolings, made after refiring three of four original FuO/sub 2/ wafers in air, were consistent with the last run of the first series. The final low-temperature heat capacity vs temperature curve was more like that reported for ThO/sub 2/ than it was for similar curves reported for UO/sub 2/ and NpO/sub 2/. A least squares equation relating heat capacity and temperature is given for the low-temperature region. Values of heat capacity, entropy, and enthalpy are listed for several temperatures. (auth
A compilation of available fundamental information concerning plutonium oxides. Methods of preparati...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
International audienceThe heat capacity of (U, Pu)O2 samples having cumulated alpha-decay damage was...
The low-temperature heat capacity of the (Th1−y,Puy)O2 solid solution with y=0.03, 0.08, 0.30, 0.54 ...
AbstractThe low-temperature heat capacity of the (Th1−y,Puy)O2 solid solution with y=0.03, 0.08, 0.3...
Recently, novel container-less laser heating experimental data have been published on the melting be...
The low-temperature heat capacity of (U1−yThy)O2 and 238Pu-doped UO2 samples were determined using h...
The heat capacity of high purity uranium dioxide has been re-examined over the low-temperature range...
The melting behaviour of mixed uranium-plutonium dioxides (MOX) has been investigated by laser heati...
The enthalpy increments of the (Th1-y, Puy)O2 solid solution with y= 0.03, 0.08, 0.30, 0.54 and 0.85...
The low-temperature heat capacity of (U1−yThy)O2 and 238Pu-doped UO2 samples were determined using h...
Data on thermophysical properties of solid and liquid UO{sub 2} have been reviewed and critically as...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
The entalpy increments of pure NpO2 have been measured using drop calorimetry in the temperature ran...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
A compilation of available fundamental information concerning plutonium oxides. Methods of preparati...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
International audienceThe heat capacity of (U, Pu)O2 samples having cumulated alpha-decay damage was...
The low-temperature heat capacity of the (Th1−y,Puy)O2 solid solution with y=0.03, 0.08, 0.30, 0.54 ...
AbstractThe low-temperature heat capacity of the (Th1−y,Puy)O2 solid solution with y=0.03, 0.08, 0.3...
Recently, novel container-less laser heating experimental data have been published on the melting be...
The low-temperature heat capacity of (U1−yThy)O2 and 238Pu-doped UO2 samples were determined using h...
The heat capacity of high purity uranium dioxide has been re-examined over the low-temperature range...
The melting behaviour of mixed uranium-plutonium dioxides (MOX) has been investigated by laser heati...
The enthalpy increments of the (Th1-y, Puy)O2 solid solution with y= 0.03, 0.08, 0.30, 0.54 and 0.85...
The low-temperature heat capacity of (U1−yThy)O2 and 238Pu-doped UO2 samples were determined using h...
Data on thermophysical properties of solid and liquid UO{sub 2} have been reviewed and critically as...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
The entalpy increments of pure NpO2 have been measured using drop calorimetry in the temperature ran...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
A compilation of available fundamental information concerning plutonium oxides. Methods of preparati...
The evaluation of thermal properties of actinide oxide fuels is a problem of high importance for the...
International audienceThe heat capacity of (U, Pu)O2 samples having cumulated alpha-decay damage was...