MEASUREMENTS THROUGH A HOT CELL WINDOW USING OPTICAL TOOLING

S>Optical tooling has been evaluated for the measurement of physical dimensions of radioactive parts through hot cell windows. Instruments were set up outside of a four foot thick lead glass window and by means of a grid plate which had been accurately scribed, a ''contour map'' or calibration chart of the window variations was recorded. Although the window was not specially selected, the readings were within 1.0% of the true dimension without using correction factors. One of the calibration chart with the window reduced the error to plus or minus 0.1%. The method is considered feasible and sufficiently fast for a wide variety of hot cell measurements. A pin point light source is suggested as a simple check for selective assembly of lead glass laminates during manufacture of hot cell windows to provide control of optical properties. (auth