Tests are described to determine the amount of entrained moisture occurring in the steam of the Pathfinder Power Plant as design parameters were varied. It was found that the height of the moisture separator and the velocity of the steam should be adjusted so that the permissible steam velocity for the particular height is not exceeded. If this is done, the amount of moisture entering the separator should be less than 1%, an amount of moisture that should not be difficult to remove with moisture separators. (J.R.D.
For purposes of analysis and experiment the centrifugal type downflow separator was divided into the...
For accurate measurement of steam flow rate, the dryness fraction has to be included in the flow rat...
The moisture transition region of a turbine, where the steam changes from superheated to moist, is f...
In recent years a greater need for power station efficiency has become evident; improving turbine bl...
The main aim of the current work is to increase operation efficiency and reliability of moisture sep...
Installation of the test equipment and checkout of the steam-water test facility's controls for the ...
Calibration of the liquid-level detector for steam-water facility is complete from 600 to 2000 psig....
The vapour mass fraction (dryness fraction) of wet-steam flows such as those encountered in the stea...
The pressure drop of a moisture separator in a steam generator is the important design parameter to ...
A hydraulic analysis of the Pathfinder boiler core was completed. A description of flow paths includ...
Pressure drop across the moisture separator installed in the steam generator of a nuclear power plan...
Citation: Whipple, James Halley and Seaton, Roy A. Tests of the efficiency of steam separators. Seni...
The phenomenon of carryover, i.e entrainment of liquid along with separated steam is observed in all...
Systems of moisture separators - reheaters (SMSR) were created simultaneously with the powerful turb...
The aim of this paper is to introduce a new design of the extinction probes developed for wet steam ...
For purposes of analysis and experiment the centrifugal type downflow separator was divided into the...
For accurate measurement of steam flow rate, the dryness fraction has to be included in the flow rat...
The moisture transition region of a turbine, where the steam changes from superheated to moist, is f...
In recent years a greater need for power station efficiency has become evident; improving turbine bl...
The main aim of the current work is to increase operation efficiency and reliability of moisture sep...
Installation of the test equipment and checkout of the steam-water test facility's controls for the ...
Calibration of the liquid-level detector for steam-water facility is complete from 600 to 2000 psig....
The vapour mass fraction (dryness fraction) of wet-steam flows such as those encountered in the stea...
The pressure drop of a moisture separator in a steam generator is the important design parameter to ...
A hydraulic analysis of the Pathfinder boiler core was completed. A description of flow paths includ...
Pressure drop across the moisture separator installed in the steam generator of a nuclear power plan...
Citation: Whipple, James Halley and Seaton, Roy A. Tests of the efficiency of steam separators. Seni...
The phenomenon of carryover, i.e entrainment of liquid along with separated steam is observed in all...
Systems of moisture separators - reheaters (SMSR) were created simultaneously with the powerful turb...
The aim of this paper is to introduce a new design of the extinction probes developed for wet steam ...
For purposes of analysis and experiment the centrifugal type downflow separator was divided into the...
For accurate measurement of steam flow rate, the dryness fraction has to be included in the flow rat...
The moisture transition region of a turbine, where the steam changes from superheated to moist, is f...