Experiments are described which were designed to yield information pertinent to the evaluation of the nuclear parameters of various fuel-moderator lattices in the environment of the Sioux Falls Power Reactor (Controlled Recirculation Boiling Reactor) core. The test lattice section was enclosed in an element which replaced one of the fuel elements of the Penn State Reactor. Parameters measured were U/sup 236/ neutron capture cadmium ratio, space-averaged thermal neutron flux ratios, and reactivity coefficients. (W.D.M.
Basic physics parameters are being determined for lattices of slightly enriched fuel in moderators c...
International audienceExperiments on nuclear fuels and materials in MTRs are a mandatory step for su...
Work performed at the Westinghouse Atomic Power Division's Bettis Plant."U.S. Government Printing Of...
Experiments to obtain detailed thermal flux distribution measurements within a unit fuel cell and me...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1967.Bibliogra...
ABS>Fuel Element Research and Development. Dynamic and static corrosion tests on 8001 Al were comple...
Reactor physics parameters were measured in six heavy water lattices which were miniature versions o...
Technical progress on the research and development program being performed in connection with the de...
A thermal and hydraulic design investigation of the Pathfinder Reactor, including analytical and exp...
PhDEnergyNuclear physicsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://d...
Under the general heading of Reactor Lattices are reported a new method of calculating resonance esc...
"Knolls Atomic Power Laboratory, Schenectady, New York, operated for the U.S. Atomic Energy Commissi...
The energy spectra of neutrons emitted from a pressurized-water-reactor fuel assembly have been calc...
A series of critical experiments were completed from 1962–1965 at Oak Ridge National Laboratory’s (O...
The equipment and experiments performed to measure the thermal-neutron- flux distribution in a fuel ...
Basic physics parameters are being determined for lattices of slightly enriched fuel in moderators c...
International audienceExperiments on nuclear fuels and materials in MTRs are a mandatory step for su...
Work performed at the Westinghouse Atomic Power Division's Bettis Plant."U.S. Government Printing Of...
Experiments to obtain detailed thermal flux distribution measurements within a unit fuel cell and me...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1967.Bibliogra...
ABS>Fuel Element Research and Development. Dynamic and static corrosion tests on 8001 Al were comple...
Reactor physics parameters were measured in six heavy water lattices which were miniature versions o...
Technical progress on the research and development program being performed in connection with the de...
A thermal and hydraulic design investigation of the Pathfinder Reactor, including analytical and exp...
PhDEnergyNuclear physicsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://d...
Under the general heading of Reactor Lattices are reported a new method of calculating resonance esc...
"Knolls Atomic Power Laboratory, Schenectady, New York, operated for the U.S. Atomic Energy Commissi...
The energy spectra of neutrons emitted from a pressurized-water-reactor fuel assembly have been calc...
A series of critical experiments were completed from 1962–1965 at Oak Ridge National Laboratory’s (O...
The equipment and experiments performed to measure the thermal-neutron- flux distribution in a fuel ...
Basic physics parameters are being determined for lattices of slightly enriched fuel in moderators c...
International audienceExperiments on nuclear fuels and materials in MTRs are a mandatory step for su...
Work performed at the Westinghouse Atomic Power Division's Bettis Plant."U.S. Government Printing Of...