Measurements were made of the drag forces acting on projectile noses rotating at zero yaw about an axis parallel to the direction of the approaching flow. The noses were rotating in the cavity formed at a cavitation number of about 0.29, based upon the approach velocity. Thus, only the front portion of the nose was in contact with the water
This report covers the progress made to date on an investigation of cavitation on various projectile...
As a part of the program to study high sinking rate shapes, a series of drag tests was run in the Hi...
At the request of the Naval Ordnance Test Station, Inyokern, Pasadena Annex, several tests were made...
Measurements were made of the drag forces acting on projectile noses rotating at zero yaw about an a...
A program of experimental work on air-supported cavity flow has been in progress in the Free Surface...
Cavitation tests were conducted in the High Speed Water Tunnel on a proposed projectile with control...
Water Tunnel measurements were made of the hydrodynamic forces and moments, and of the high frequenc...
The cavity phase of the water entry of a projectile is described and the results are presented for t...
Access restricted to the OSU CommunityThe problem treated in this dissertation is the behavior of a ...
The results of drag measurements on a flat lamina, wedges, a circular cylinder and a scoop channel i...
This paper is a parametric study of the water-entry problem of plunging projectiles. Four nosecone s...
This laboratory was requested to recommend a nose design for the 12.75-inch Antisubmarine Rocket whi...
Addressing the problem of the influence of surface properties on the cavity in the process of a movi...
As part of an experiment on unsteady flow past a cavitating circular disk, it was necessary to make ...
The results of an experimental program carried out in the High Speed Water Tunnel to measure the fo...
This report covers the progress made to date on an investigation of cavitation on various projectile...
As a part of the program to study high sinking rate shapes, a series of drag tests was run in the Hi...
At the request of the Naval Ordnance Test Station, Inyokern, Pasadena Annex, several tests were made...
Measurements were made of the drag forces acting on projectile noses rotating at zero yaw about an a...
A program of experimental work on air-supported cavity flow has been in progress in the Free Surface...
Cavitation tests were conducted in the High Speed Water Tunnel on a proposed projectile with control...
Water Tunnel measurements were made of the hydrodynamic forces and moments, and of the high frequenc...
The cavity phase of the water entry of a projectile is described and the results are presented for t...
Access restricted to the OSU CommunityThe problem treated in this dissertation is the behavior of a ...
The results of drag measurements on a flat lamina, wedges, a circular cylinder and a scoop channel i...
This paper is a parametric study of the water-entry problem of plunging projectiles. Four nosecone s...
This laboratory was requested to recommend a nose design for the 12.75-inch Antisubmarine Rocket whi...
Addressing the problem of the influence of surface properties on the cavity in the process of a movi...
As part of an experiment on unsteady flow past a cavitating circular disk, it was necessary to make ...
The results of an experimental program carried out in the High Speed Water Tunnel to measure the fo...
This report covers the progress made to date on an investigation of cavitation on various projectile...
As a part of the program to study high sinking rate shapes, a series of drag tests was run in the Hi...
At the request of the Naval Ordnance Test Station, Inyokern, Pasadena Annex, several tests were made...