Mathematical model for multiple cooling tower plumes

A mathematical model is developed resulting in a computer program for the prediction of the behavior of plumes from multiple cooling towers with multiple cells. A general integral method based on the conservation of mass, momentum, energy (heat), and moisture fluxes (before and after plume merging), were employed in the prediction scheme. The effects of ambient stratifications of temperature, moisture, and wind are incorporated in the model. An axisymmetric round plume is assumed to be emitted from each individual cell before interference with neighboring plumes. A finite length slot plume in the central part and two half round plumes at both ends of the merged plume were used to approximate the plume after merging. The entrainment and drag functions are calculated based on the modified merged plume shape. The computer output provides the predicted plume properties such as excess plume temperature, humidity and liquid phase moisture (water droplet), plume trajectory, width, and dilution at the merging locations and the beginning and ending points of the visible part of the plumes. Detailed printout and contour plots of excess temperature and moisture distribution can also be obtained if desired. Based on comparison with laboratory data this model gives good predictions for the case of dry plumes (no moisture involved). It should be noted that several empirical coefficients are as yet not accurately known. Verification of this model for the wet plume (such as for prototype cooling tower plumes) and the determination of the values for these empirical coefficients to be used in prototype applications must await detailed comparison with field data