Add to ORKGThe viscosity of the Cu47-Ti34-Zr11-Ni8 glass forming alloy was determined by beam bending experiments and by a noncontact oscillating drop technique. These viscosity data can be described with the Vogel-Fulcher-Tammann relation. Using the strong/fragile classification of glasses, Cu47-Ti34-Zr11-Ni8 is more fragile than the strong Zr-Ti-Cu-Ni-Be metallic glass formers
金沢大学大学院自然科学研究科機能創成システムIt has been shown that the shear viscosity of bulk and ribbon glassy Pd40 Cu30...
The constraint in sample size imposed by the critical cooling rate necessary for glass formation usi...
Graduation date: 2005A high temperature high vacuum rheometer has been designed, fabricated,\ud and ...
The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercool...
Graduation date: 2008The influence of shear rate and temperature on the viscosity and fragility of t...
Graduation date: 2006The viscosity of Zr[subscript 41.2]Ti[subscript 13.8]Cu[subscript 12.5]Ni[subsc...
Crystallization behavior and equilibrium viscosity of a series of alloys in the Zr-Ti-Cu-Ni-Be syste...
High-temperature surface tension and viscosities for five bulk metallic glass-forming alloys with wi...
The shear viscosity of liquid Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 has been measured. At the liquidus temp...
Denman Undergraduate Research Forum: Second Place in EngineeringMetallic glasses are a relatively ne...
The thermoplastic formability (TPF) of metallic glasses was found to be related to the calorimetrica...
The thermodynamics and kinetics of the bulk metallic glass forming Mg65Cu25Y10 liquid were investiga...
International audienceUsing viscosity measurement method and in-situ heating synchrotron radiation, ...
In contrast to pure metals and most non-glass forming alloys, metallic glass-formers are moderately ...
Viscosity and enthalpy relaxation from the amorphous state into the supercooled liquid state was inv...
金沢大学大学院自然科学研究科機能創成システムIt has been shown that the shear viscosity of bulk and ribbon glassy Pd40 Cu30...
The constraint in sample size imposed by the critical cooling rate necessary for glass formation usi...
Graduation date: 2005A high temperature high vacuum rheometer has been designed, fabricated,\ud and ...
The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercool...
Graduation date: 2008The influence of shear rate and temperature on the viscosity and fragility of t...
Graduation date: 2006The viscosity of Zr[subscript 41.2]Ti[subscript 13.8]Cu[subscript 12.5]Ni[subsc...
Crystallization behavior and equilibrium viscosity of a series of alloys in the Zr-Ti-Cu-Ni-Be syste...
High-temperature surface tension and viscosities for five bulk metallic glass-forming alloys with wi...
The shear viscosity of liquid Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 has been measured. At the liquidus temp...
Denman Undergraduate Research Forum: Second Place in EngineeringMetallic glasses are a relatively ne...
The thermoplastic formability (TPF) of metallic glasses was found to be related to the calorimetrica...
The thermodynamics and kinetics of the bulk metallic glass forming Mg65Cu25Y10 liquid were investiga...
International audienceUsing viscosity measurement method and in-situ heating synchrotron radiation, ...
In contrast to pure metals and most non-glass forming alloys, metallic glass-formers are moderately ...
Viscosity and enthalpy relaxation from the amorphous state into the supercooled liquid state was inv...
金沢大学大学院自然科学研究科機能創成システムIt has been shown that the shear viscosity of bulk and ribbon glassy Pd40 Cu30...
The constraint in sample size imposed by the critical cooling rate necessary for glass formation usi...
Graduation date: 2005A high temperature high vacuum rheometer has been designed, fabricated,\ud and ...