The multi-resonant response of three-steps tapered dipole nano-antennas, coupled to a resistive and fast micro-bolometer, is investigated for the efficient sensing in the infrared band. The proposed devices are designed to operate at 10.6 µm, regime where the complex refractive index of metals becomes important, in contrast to the visible counterpart, and where a full parametric analysis is performed. By using a particle swarm algorithm (PSO) the geometry was adjusted to match the impedance between the nanoantenna and the microbolometer, reducing the return losses by a factor of 650 percent. This technique is compared to standards matching techniques based on transmission lines, showing better accuracy. Tapered dipoles, therefore, open the ...
Recently thermo-electrical nanoantennas, also known as Seebeck nanoantennas, have been proposed as a...
This work was focused on bolometers (uncooled infrared sensors), which are based on the following pr...
This work focuses upon the design and fabrication process of a novel parabolic reflector integrated ...
Abstract— In this letter we introduce a new type of infrared sensor, based on thermocouple nanoanten...
The near-field characteristics of single, double, and arrays of connected dipole nano-antennas coupl...
In this chapter, novel designs of tapered-dipole nanoantennas are investigated for energy harvesting...
Seebeck nanoantennas, which are based on the thermoelectric effect, have been proposed for electroma...
Mid-infrared (mid-IR) detection and imaging over atmospheric transparent 3-5 μm and 8-12 μm bands ar...
Microbolometers arethe most common uncooled infrared techniques that allow 50 mK-temperature resolut...
We provide here a demonstration of 12−μm-pitch nanoelectromechanical resonant infrared sensors with ...
Abstract One critical factor for bolometer sensitivity is efficient electromagnetic heating of therm...
This thesis presents results on nano- to microscopic bolometers. They are made of polycrystalline me...
The state-of-the-art quantum infrared photodetectors have high performance, but obtaining high sensi...
In this letter, the authors develop an optimized Seebeck nanoantenna design suitablefor IR harvestin...
We compare the detection mechanisms employed in microstrip dipole antenna-coupled infrared detectors...
Recently thermo-electrical nanoantennas, also known as Seebeck nanoantennas, have been proposed as a...
This work was focused on bolometers (uncooled infrared sensors), which are based on the following pr...
This work focuses upon the design and fabrication process of a novel parabolic reflector integrated ...
Abstract— In this letter we introduce a new type of infrared sensor, based on thermocouple nanoanten...
The near-field characteristics of single, double, and arrays of connected dipole nano-antennas coupl...
In this chapter, novel designs of tapered-dipole nanoantennas are investigated for energy harvesting...
Seebeck nanoantennas, which are based on the thermoelectric effect, have been proposed for electroma...
Mid-infrared (mid-IR) detection and imaging over atmospheric transparent 3-5 μm and 8-12 μm bands ar...
Microbolometers arethe most common uncooled infrared techniques that allow 50 mK-temperature resolut...
We provide here a demonstration of 12−μm-pitch nanoelectromechanical resonant infrared sensors with ...
Abstract One critical factor for bolometer sensitivity is efficient electromagnetic heating of therm...
This thesis presents results on nano- to microscopic bolometers. They are made of polycrystalline me...
The state-of-the-art quantum infrared photodetectors have high performance, but obtaining high sensi...
In this letter, the authors develop an optimized Seebeck nanoantenna design suitablefor IR harvestin...
We compare the detection mechanisms employed in microstrip dipole antenna-coupled infrared detectors...
Recently thermo-electrical nanoantennas, also known as Seebeck nanoantennas, have been proposed as a...
This work was focused on bolometers (uncooled infrared sensors), which are based on the following pr...
This work focuses upon the design and fabrication process of a novel parabolic reflector integrated ...