The thermal degradation of the polyamides (PA) 6, 12, 66 and 612 was investigated by means of thermal analysis/mass spectrometry (TA-MS) and pyrolysis in a german standard oven. Sample masses were about 20 and 40 mg. The heating rates used in the dynamic studies were 1, 5 and 10 K min(-1). Both air and nitrogen atmospheres were utilized. The kinetic parameters were calculated from the TA-MS measurements and the main decomposition products were registered online. The evolved products from the pyrolysis oven were captured and analyzed off-line by GC/MS
Thermal degradation of aromatic polyesters 1 (m = 2, 3, 4, 5, and 6) was studied by pyrol-ysis/gas c...
The thermal degradation of polyamide 6 (PA-6) occurs through competing mechanisms leading to caprola...
Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is a promising quite new polymer with very inter...
he thermal degradation of the aliphatic polyamides 6 and 66 was investigated by means of the combine...
In this work the changes in thermal degradation characteristics of polyamide 6 (PA6) in the presence...
The thermal degradation of polyamide 6, polyacrylonitrile and of a polyurethane rigid foam was studi...
The thermal degradation of aromatic polyimides in nitrogen at 700°C was studied using pyrolysis gas...
The objective of this work is the investigation of the thermal degradation of nitrogen-containing po...
In this study, the kinetic parameters for the thermal decomposition of polyacrylamide are establishe...
The thermal decomposition of polyaniline(PAn) and poly-o-toluidine(POT) was studied by means of dire...
Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The ...
Waste electric and electronic equipments (WEEE) and automotive plastic shredder contain nitrogen-con...
International audienceThermal aging of an additive free PA 6-6 has been elucidated at 90, 100, 120, ...
The enzymatic degradation of poly(d,l-lactide) (PLA), poly(\epsilon-caprolactone) (PCL), and their b...
Polyamides 6.6 (PA-6.6) and 6.10 (PA-6.10) decompose on heating by scission of the N-alkylamide bond...
Thermal degradation of aromatic polyesters 1 (m = 2, 3, 4, 5, and 6) was studied by pyrol-ysis/gas c...
The thermal degradation of polyamide 6 (PA-6) occurs through competing mechanisms leading to caprola...
Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is a promising quite new polymer with very inter...
he thermal degradation of the aliphatic polyamides 6 and 66 was investigated by means of the combine...
In this work the changes in thermal degradation characteristics of polyamide 6 (PA6) in the presence...
The thermal degradation of polyamide 6, polyacrylonitrile and of a polyurethane rigid foam was studi...
The thermal degradation of aromatic polyimides in nitrogen at 700°C was studied using pyrolysis gas...
The objective of this work is the investigation of the thermal degradation of nitrogen-containing po...
In this study, the kinetic parameters for the thermal decomposition of polyacrylamide are establishe...
The thermal decomposition of polyaniline(PAn) and poly-o-toluidine(POT) was studied by means of dire...
Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The ...
Waste electric and electronic equipments (WEEE) and automotive plastic shredder contain nitrogen-con...
International audienceThermal aging of an additive free PA 6-6 has been elucidated at 90, 100, 120, ...
The enzymatic degradation of poly(d,l-lactide) (PLA), poly(\epsilon-caprolactone) (PCL), and their b...
Polyamides 6.6 (PA-6.6) and 6.10 (PA-6.10) decompose on heating by scission of the N-alkylamide bond...
Thermal degradation of aromatic polyesters 1 (m = 2, 3, 4, 5, and 6) was studied by pyrol-ysis/gas c...
The thermal degradation of polyamide 6 (PA-6) occurs through competing mechanisms leading to caprola...
Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is a promising quite new polymer with very inter...