Add to ORKGOn 04 June 2007 at 1103 hrs while the deminer was working in his clearance lane, his trowel struck the top of a PMN anti personnel mine, causing the mine to detonate. During the accident his visor was not worn. This lack of face protection caused the serious injuries to his eyes. The accident occurred near a corner of a ruined mud wall. The mud wall over a period of time had gradually disintegrated and fallen on ground surface, thus increasing the ground depth over the mine. The ground depth reached 70 cm at the accident point; the deminer had failed to remove this additional soil above original surface of the ground
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
The accident occurred on 22 June 2010, 09:30 AM in clearance lane of [the Victim], located in a stee...
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing...
On 15 March 2010 at 08:55 hrs while [the Victim] was busy in excavation of a detected signal, sudden...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On the 7th Oct 2010 at 08:40, the deminer [the Victim] initiated a PMN anti-personnel mine with a pi...
On 25 August 2007 at 0905 hrs while [the Victim] a deminer of Party-01, Section-1 of the mentioned t...
On 11 May 2009 at 09:20 the de-miner [the Victim] was excavating a detected signal in his clearance ...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
[The Victim] deminer was working in a bushy area with MIL-D1 mine detector and after he pinpointed a...
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his cleara...
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
The accident occurred on 22 June 2010, 09:30 AM in clearance lane of [the Victim], located in a stee...
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing...
On 15 March 2010 at 08:55 hrs while [the Victim] was busy in excavation of a detected signal, sudden...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On the 7th Oct 2010 at 08:40, the deminer [the Victim] initiated a PMN anti-personnel mine with a pi...
On 25 August 2007 at 0905 hrs while [the Victim] a deminer of Party-01, Section-1 of the mentioned t...
On 11 May 2009 at 09:20 the de-miner [the Victim] was excavating a detected signal in his clearance ...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
[The Victim] deminer was working in a bushy area with MIL-D1 mine detector and after he pinpointed a...
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his cleara...
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...