Add to ORKGWhile the deminer was clearing an area assigned to him by the team leader and after he recovered an AT Saci mine he entered the contaminated hazardous area trying to locate the AP M14 12 o’clock mine with out following the SOP and the proper procedure , then he stepped on a non cleared area and activated the M14 which caused a badly injured to his left foot
Deminer was approaching 9 O’clock M35 AP mine on one of the main mine belt clusters, after she remov...
While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the ...
While the deminer try to investigate a signal indicated by the metal detector in an expected site of...
The deminer was working in IOE containing M14 AP mines in Section 3 in Sabha 11, he used the MD to i...
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid...
Deminer was clearing the first 60 cm of one cluster heading toward the centre mine after he cleared ...
The deminer was trying to clear the AP mine in a cluster, there was no signal due to the depth of th...
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The dem...
While the deminer working in the Ren. Belt (B) clearing the AP M14 in cluster 8 last section home si...
While the deminer was clearing the lane from stones using the light rake he removed the stones not b...
After I recovered the main mine (AT M19) and AP mine M14 (12 o’clock direction) I started to recover...
The deminer was working within the Site Preparation Stage to identify the centre of the mine line an...
While the deminer trying to recover an AP M14 mine using the heavy RAKE he applied a pressure in the...
The incident happened due an individual mistake while the deminer investigating an indicated signal ...
The deminer was working in the centre lane in the main minefield 346 and he recovered 6 M14 APs. At ...
Deminer was approaching 9 O’clock M35 AP mine on one of the main mine belt clusters, after she remov...
While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the ...
While the deminer try to investigate a signal indicated by the metal detector in an expected site of...
The deminer was working in IOE containing M14 AP mines in Section 3 in Sabha 11, he used the MD to i...
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid...
Deminer was clearing the first 60 cm of one cluster heading toward the centre mine after he cleared ...
The deminer was trying to clear the AP mine in a cluster, there was no signal due to the depth of th...
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The dem...
While the deminer working in the Ren. Belt (B) clearing the AP M14 in cluster 8 last section home si...
While the deminer was clearing the lane from stones using the light rake he removed the stones not b...
After I recovered the main mine (AT M19) and AP mine M14 (12 o’clock direction) I started to recover...
The deminer was working within the Site Preparation Stage to identify the centre of the mine line an...
While the deminer trying to recover an AP M14 mine using the heavy RAKE he applied a pressure in the...
The incident happened due an individual mistake while the deminer investigating an indicated signal ...
The deminer was working in the centre lane in the main minefield 346 and he recovered 6 M14 APs. At ...
Deminer was approaching 9 O’clock M35 AP mine on one of the main mine belt clusters, after she remov...
While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the ...
While the deminer try to investigate a signal indicated by the metal detector in an expected site of...