Add to ORKGThe accident occurred whilst the deminer was excavating on a detector reading; the deminer failed to identify the center of reading, therefore he hit top of the mine
_(2)_(cropped).jpg%3Fwidth%3D300&w=3840&q=75)
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
While he was marking his designated clearance lane in term of work progress, a painted stone fall do...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
It is the conclusion of the investigation team that the involved deminer did not properly mark the s...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in hi...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wro...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
Refering to other accidents with this demining group at this period, the Victim may have been using ...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
While he was marking his designated clearance lane in term of work progress, a painted stone fall do...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
It is the conclusion of the investigation team that the involved deminer did not properly mark the s...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in hi...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wro...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
Refering to other accidents with this demining group at this period, the Victim may have been using ...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
While he was marking his designated clearance lane in term of work progress, a painted stone fall do...