Add to ORKGThe victim was investigating the source of a detector reading in an area where the ground had a high level of natural soil contamination. The victim was reported to have been lying down to work. He used his prodder, but because the ground was very hard he also used a trowel to break up the surface. At 11:27 he initiated a Type 72A mine. After first aid the victim was taken by ambulance to Battambang Provincial Hospital, arriving at 12:40
The victim was working as a detector man and at 10:25 he changed roles within the team. Instead of r...
The Victim had just replaced his partner after 30 minutes rest. His metal detector gave 5 readings w...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The victim stated that he was aware that he had breached SOPs by carrying the fuse out of the mined ...
At 12:45 he initiated a mine with his detector, causing him to stagger backwards and collapse about ...
At the time of the accident, Victim No.1 was excavating a detector reading. Victim No.2 was the dete...
The working area was on the Cambodian mid-level (as opposed to flood plain and mountainous area) so ...
The mined area was a road that linked Malay with National Route 5. The victim was working as a prodd...
The demining team uncovered three Type 72a mines and called the supervisor to deal with them. The vi...
The victim was the vegetation cutter and prodder man. He cleared 50cm of vegetation at the end of th...
The victim was a prodder man and he and his partner had already cleared about 20m and had found abou...
The victim stated that he was prodding to a depth of about 8cm and did not feel the mine before it e...
The victim was working normally and got a reading from his detector which the investigators believe ...
Signed by an expatriate specialist and dated 5th September 1998, the report stated that demining had...
At 08:20 the victim located a mine and bent down to place a marker. At that point he had a dizzy spe...
The victim was working as a detector man and at 10:25 he changed roles within the team. Instead of r...
The Victim had just replaced his partner after 30 minutes rest. His metal detector gave 5 readings w...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The victim stated that he was aware that he had breached SOPs by carrying the fuse out of the mined ...
At 12:45 he initiated a mine with his detector, causing him to stagger backwards and collapse about ...
At the time of the accident, Victim No.1 was excavating a detector reading. Victim No.2 was the dete...
The working area was on the Cambodian mid-level (as opposed to flood plain and mountainous area) so ...
The mined area was a road that linked Malay with National Route 5. The victim was working as a prodd...
The demining team uncovered three Type 72a mines and called the supervisor to deal with them. The vi...
The victim was the vegetation cutter and prodder man. He cleared 50cm of vegetation at the end of th...
The victim was a prodder man and he and his partner had already cleared about 20m and had found abou...
The victim stated that he was prodding to a depth of about 8cm and did not feel the mine before it e...
The victim was working normally and got a reading from his detector which the investigators believe ...
Signed by an expatriate specialist and dated 5th September 1998, the report stated that demining had...
At 08:20 the victim located a mine and bent down to place a marker. At that point he had a dizzy spe...
The victim was working as a detector man and at 10:25 he changed roles within the team. Instead of r...
The Victim had just replaced his partner after 30 minutes rest. His metal detector gave 5 readings w...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...