Add to ORKGThe investigators determined that Victim No.1 was scratching a mark to show the end of the breaching land outside the area actually cleared (he should have left a 50cm safety margin the other way) when his bayonet pulled the tripwire attached to the mine. The mine was three metres away from the deminer when it was initiated. They thought that Victim No 2 did not maintain the proper safety distance and so was hit by some fragments
The investigators determined that the victim was clearing a breaching lane. He got a detector readin...
The investigators determined that he detected a reading and put his helmet on to prod. He could find...
The investigators determined that the victim returned to his breaching lane after the short break an...
The investigators determined that the victim was clearing a portion of the minefield with bushes, gr...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The investigators decided that the two victims were assigned a breaching lane to clear. Victim No.1 ...
The investigators determined that the victim got a detector reading and started prodding in a prone ...
The investigators determined that the victim did not use a tripwire feeler before using the detector...
The investigators determined that the victim was in a known POMZ minefield but neglected to use a tr...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The investigators determined that the victim was investigating a reading in a pile of soil deposited...
The investigators determined that the victim had checked the area with a detector then started to cu...
The victim was going to inspect the work of a breaching party when at 09:30 he stepped on a mine tha...
The investigators determined that the victim was marking the cleared area up to a mine he had uncove...
The investigators determined that the victim was working in an area with barbed wire obstacles (that...
The investigators determined that the victim was clearing a breaching lane. He got a detector readin...
The investigators determined that he detected a reading and put his helmet on to prod. He could find...
The investigators determined that the victim returned to his breaching lane after the short break an...
The investigators determined that the victim was clearing a portion of the minefield with bushes, gr...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The investigators decided that the two victims were assigned a breaching lane to clear. Victim No.1 ...
The investigators determined that the victim got a detector reading and started prodding in a prone ...
The investigators determined that the victim did not use a tripwire feeler before using the detector...
The investigators determined that the victim was in a known POMZ minefield but neglected to use a tr...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The investigators determined that the victim was investigating a reading in a pile of soil deposited...
The investigators determined that the victim had checked the area with a detector then started to cu...
The victim was going to inspect the work of a breaching party when at 09:30 he stepped on a mine tha...
The investigators determined that the victim was marking the cleared area up to a mine he had uncove...
The investigators determined that the victim was working in an area with barbed wire obstacles (that...
The investigators determined that the victim was clearing a breaching lane. He got a detector readin...
The investigators determined that he detected a reading and put his helmet on to prod. He could find...
The investigators determined that the victim returned to his breaching lane after the short break an...