Add to ORKGThe investigators determined that the victim was in a known POMZ minefield but neglected to use a tripwire feeler before advancing beneath a big bush with the detector, so pulled a tripwire with the detector head. It was recorded that there was No damage to equipment , but photographs of a damaged Schiebel detector were included in the report
The investigators determined that the accident occurred when the deminer used only one marking stone...
The Victim was working in a breaching party making a lane to the top of the hill. He had been workin...
The investigators decided that the victim had got a reading with his detector and investigated it bu...
The investigators determined that the victim got a detector reading and started prodding in a prone ...
The investigators determined that the victim did not use a tripwire feeler before using the detector...
The investigators determined that the victim was clearing a portion of the minefield with bushes, gr...
The investigators determined that the victim had checked the area with a detector then started to cu...
The investigators determined that Victim No.1 was scratching a mark to show the end of the breaching...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The investigators determined that at around 11:00 the Section Leader instructed the deminers to pack...
The investigators determined that the victim was pulling a wire obstacle out of the way when he acci...
The investigators reported that the victim was working normally and looking for tripwires. He found ...
The investigators decided that the victim got a detector reading and investigated it but found nothi...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
The investigators determined that the accident occurred when the deminer used only one marking stone...
The Victim was working in a breaching party making a lane to the top of the hill. He had been workin...
The investigators decided that the victim had got a reading with his detector and investigated it bu...
The investigators determined that the victim got a detector reading and started prodding in a prone ...
The investigators determined that the victim did not use a tripwire feeler before using the detector...
The investigators determined that the victim was clearing a portion of the minefield with bushes, gr...
The investigators determined that the victim had checked the area with a detector then started to cu...
The investigators determined that Victim No.1 was scratching a mark to show the end of the breaching...
The investigators determined that the victim was working in a bushy clearance lane with continuous d...
The investigators determined that at around 11:00 the Section Leader instructed the deminers to pack...
The investigators determined that the victim was pulling a wire obstacle out of the way when he acci...
The investigators reported that the victim was working normally and looking for tripwires. He found ...
The investigators decided that the victim got a detector reading and investigated it but found nothi...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
The investigators determined that the accident occurred when the deminer used only one marking stone...
The Victim was working in a breaching party making a lane to the top of the hill. He had been workin...
The investigators decided that the victim had got a reading with his detector and investigated it bu...