Numerical Study of Heat and Mass Transfer Using Phase Change Materials

Phase Change Materials (PCM) absorb and release heat at preset temperatures. Due to their relatively high values of latent heat, they are capable of storing and releasing large amounts of energy during phase change. When a PCM is in its solid phase, it will absorb heat as the external temperature rises. The temperature of the PCM will mirror the external temperature until the melting point of PCM is reached. At this stage, the PCM will begin to melt with almost no change in its temperature. PCM plays an opposite role when the external temperature drops. It releases the stored energy back while going through phase change from liquid phase to solid phase. The present work is a numerical study towards fundamental understanding of the impact of using PCM on enhancement of heat and mass transfer in several scenarios. A numerical analysis has been carried out to determine the impact of presence of PCM on the insulating characteristics of paper board packaging. Two different cases of a layered PCM and uniformly dispersed PCM within the packaging wall are considered. The numerical results illustrate significant reduction in exchange of heat between the exterior and the interior of the packaging. Specifically, the unique concept of utilizing PCM in drying of paper is proposed and a numerical investigation is performed to determine the corresponding transport characteristics. The results indicate that the PCM acts as a heat source and a heat sink alternatingly throughout the conventional paper drying process, enhancing the drying energy efficiency. This study also included presence of gas-fired infrared emitters in the drying process as well for which the spectral absorption coefficient of PCM was measured and incorporated into the theoretical model. Finally, the impact of the presence of PCM in convective air-drying of moist paper is numerically investigated. The hot air ow is generated by an in-line jet nozzle. The air impinges on the exposed surface of the moist paper while the other side is considered to be perfectly insulated. The results provide the corresponding air flow field as well as air temperature distribution in between the nozzle exit and the surface of the moist paper. The results also reveal the enhancement of drying rates with PCM, fundamentally confirming the role of PCM on enhancing the energy efficiency of convective drying of moist paper