Add to ORKGOcean Thermal Energy Conversion (OTEC) systems are based on utilizing the temperature difference between the warm surface water around 27ºC and the cold, 1000 meter deep bottom water at around 5ºC to produce energy
Ozone formation in urban smog is controlled by a complex set of reactions which includes radical pro...
Tris-2-chloroethyl phosphate (TCEP) is a biorecalcitrant flame retardant and plasticizer. It is a to...
A limited number of coating options for titanium gas turbine engine components were explored with th...
The investigation evaluates the feasibility of moving Improv’eat operations off the grid in terms of...
It is shown in many laboratories and pilot plants that membrane techniques are more effective than o...
Providing a self-sustaining, efficient, and cost-affordable source of energy is perhaps the greatest...
Three prototype light fixtures that used Light Emitting Diodes (LED) for machine tools were develope...
The objective of this study was to design and construct a vibration control system for an electronic...
This report provides a user's guide for the TurbSim code developed to provide a numerical simulation...
The goal of this project was to develop an intelligent recloser system that is able to differentiate...
This study investigates potential cost of energy reductions that might be achieved by designing acti...
The goal of this project was to design a dynamometer to test a driveline generator. Dynamometer comp...
This project focuses on the construction of a three fluid gas absorption refrigeration unit, intende...
As part of a larger task, the Idaho National Engineering and Environmental Laboratory (INEEL) was ta...
This Energy Policy is a panoptic view of the current state of electrical energy in the Unites States...
Ozone formation in urban smog is controlled by a complex set of reactions which includes radical pro...
Tris-2-chloroethyl phosphate (TCEP) is a biorecalcitrant flame retardant and plasticizer. It is a to...
A limited number of coating options for titanium gas turbine engine components were explored with th...
The investigation evaluates the feasibility of moving Improv’eat operations off the grid in terms of...
It is shown in many laboratories and pilot plants that membrane techniques are more effective than o...
Providing a self-sustaining, efficient, and cost-affordable source of energy is perhaps the greatest...
Three prototype light fixtures that used Light Emitting Diodes (LED) for machine tools were develope...
The objective of this study was to design and construct a vibration control system for an electronic...
This report provides a user's guide for the TurbSim code developed to provide a numerical simulation...
The goal of this project was to develop an intelligent recloser system that is able to differentiate...
This study investigates potential cost of energy reductions that might be achieved by designing acti...
The goal of this project was to design a dynamometer to test a driveline generator. Dynamometer comp...
This project focuses on the construction of a three fluid gas absorption refrigeration unit, intende...
As part of a larger task, the Idaho National Engineering and Environmental Laboratory (INEEL) was ta...
This Energy Policy is a panoptic view of the current state of electrical energy in the Unites States...
Ozone formation in urban smog is controlled by a complex set of reactions which includes radical pro...
Tris-2-chloroethyl phosphate (TCEP) is a biorecalcitrant flame retardant and plasticizer. It is a to...
A limited number of coating options for titanium gas turbine engine components were explored with th...
