This project proposes a safety device worn by pedestrians, capable of detecting an approaching vehicle and warning both pedestrian and driver of potential danger. Tire sound was targeted, amplified, filtered and analyzed to determine vehicle proximity. A vibrating motor and flashing LEDs were used to warn both user and driver, depending on sound level. Tests show that tire sound is a viable means of detecting approaching vehicles. Further work is necessary to optimize the system for differing cars and environments
This project proposes a unique DC to AC inverter design to convert high voltage DC into pure sine wa...
Partnering with C-4 Systems of General Dynamics in Needham, MA, this Worcester Polytechnic Institute...
Microprocessor controlled lower-limb prosthetics provide many advantages over mechanical prosthetics...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The purpose of this project was to develop a race car for the Formula SAE Michigan Design Competitio...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
Cyclists need a detection method for vehicles to help prevent accidents and a method to display exer...
abstract: Although current urban search and rescue (USAR) robots are little more than remotely contr...
The objective for this Major Qualifying Project was to design and prototype a low speed motorcycle s...
The objective of this project was to design and implement an automated tracking and user identificat...
The field of Aerospace had a memory lapse and it was a serious one. The whole idea of gathering gase...
Time accurate Navier-Stokes computations were performed to study a class 2 (acoustic) whistle, the e...
The purpose of this MQP was to research, analyze, and construct a working prototype of a low-cost, w...
This project proposes a unique DC to AC inverter design to convert high voltage DC into pure sine wa...
Partnering with C-4 Systems of General Dynamics in Needham, MA, this Worcester Polytechnic Institute...
Microprocessor controlled lower-limb prosthetics provide many advantages over mechanical prosthetics...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The purpose of this project was to develop a race car for the Formula SAE Michigan Design Competitio...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
The D-Term Mason Square Supermarket project was aimed at building on the work of the C-Term project ...
Cyclists need a detection method for vehicles to help prevent accidents and a method to display exer...
abstract: Although current urban search and rescue (USAR) robots are little more than remotely contr...
The objective for this Major Qualifying Project was to design and prototype a low speed motorcycle s...
The objective of this project was to design and implement an automated tracking and user identificat...
The field of Aerospace had a memory lapse and it was a serious one. The whole idea of gathering gase...
Time accurate Navier-Stokes computations were performed to study a class 2 (acoustic) whistle, the e...
The purpose of this MQP was to research, analyze, and construct a working prototype of a low-cost, w...
This project proposes a unique DC to AC inverter design to convert high voltage DC into pure sine wa...
Partnering with C-4 Systems of General Dynamics in Needham, MA, this Worcester Polytechnic Institute...
Microprocessor controlled lower-limb prosthetics provide many advantages over mechanical prosthetics...