Add to ORKGThe purpose of this project was twofold; to develop both a rainwater and solar energy harvesting system. The goal was to provide renewable power for technologies with societal benefits. The rainwater energy harvesting system was designed to collect water in a gutter, channel it through a downspout and direct it onto an impulse turbine which was connected to a generator. The solar energy charger was designed with a 2W solar panel,
The deployment of thousands of wind energy facilities required to meet various renewable energy targ...
Microwave engineers and geomorphologists require rainfall data with a much greater temporal resoluti...
This study was carried out to identify the inputs of faecal coliforms like Escherichia coli (E. coli...
The purpose of the project was to provide electricity that was sufficient for powering lights and ch...
The goal of this project was two-fold: to adapt the existing WPI Kite Power System to pump water, an...
This project involved the design, manufacture, and testing of a novel water energy harvesting device...
Chapter II addresses the use of earth dams as an appropriate technology for rainwater harvesting for...
The University of North Carolina, Chapel Hill (UNC) is considering a variety of measures to reduce f...
Harvesting energy from rain has been done indirectly for hundreds of years by building dams or reser...
This project furthers the design and testing of the WPI kite-powered water-pump system. The purpose ...
The main objective of this project is to determine the potential electrical power that can be genera...
Title from PDF of title page, viewed on January 30, 2012Thesis advisor: Deborah J. O'BannonVitaInclu...
This thesis describes the sizing, dynamic modelling, and control of an automatic solar irrigation p...
The Propagating Wave Turbine Project focused on the design, construction, and verification of an ene...
Due to falling of the fossil-based fuel, renewable energy becomes one of the most important sources ...
The deployment of thousands of wind energy facilities required to meet various renewable energy targ...
Microwave engineers and geomorphologists require rainfall data with a much greater temporal resoluti...
This study was carried out to identify the inputs of faecal coliforms like Escherichia coli (E. coli...
The purpose of the project was to provide electricity that was sufficient for powering lights and ch...
The goal of this project was two-fold: to adapt the existing WPI Kite Power System to pump water, an...
This project involved the design, manufacture, and testing of a novel water energy harvesting device...
Chapter II addresses the use of earth dams as an appropriate technology for rainwater harvesting for...
The University of North Carolina, Chapel Hill (UNC) is considering a variety of measures to reduce f...
Harvesting energy from rain has been done indirectly for hundreds of years by building dams or reser...
This project furthers the design and testing of the WPI kite-powered water-pump system. The purpose ...
The main objective of this project is to determine the potential electrical power that can be genera...
Title from PDF of title page, viewed on January 30, 2012Thesis advisor: Deborah J. O'BannonVitaInclu...
This thesis describes the sizing, dynamic modelling, and control of an automatic solar irrigation p...
The Propagating Wave Turbine Project focused on the design, construction, and verification of an ene...
Due to falling of the fossil-based fuel, renewable energy becomes one of the most important sources ...
The deployment of thousands of wind energy facilities required to meet various renewable energy targ...
Microwave engineers and geomorphologists require rainfall data with a much greater temporal resoluti...
This study was carried out to identify the inputs of faecal coliforms like Escherichia coli (E. coli...