Add to ORKGThe objective of this MQP is to design, test, and assess the feasibility of a flapping-wing remote controlled micro air vehicle (MAV). The group designed an MAV with a wingspan and total length of under one foot and a weight of under one ounce, similar to existing projects. The group then manufactured, assembled, and performed several tests on a prototype of the MAV. Finally, the group proposed design improvements and recommendations for future work at WPI
Starting from forming methylammonium lead iodide (MAPI) via hydriodic acid (HI), gamma-butyrolactone...
The utilization of non-heme iron oxo complexes holds promise of a new generation of contaminant reme...
The development of a successful exoskeleton for human performance augmentation (EHPA) will require a...
The scope of the project was to create an ornithopter, a bio-inspired flapping wing mechanism to pro...
The following paper describes the process and results undertaken to create a modular robotic arm sys...
This research investigated the covalent modification of self-assembled monolayers (SAMs) formed on g...
The goal of this design project was to create an optimal fixation system to stabilize the stifle joi...
Rolling contact fatigue (RCF) cracks are a widespread problem that impairs the service life of railw...
Projecte del programa Erasmus elaborat a Salzburg University of Applied SciencesTo understand Virtua...
The goal of this study was to design a safe, easily implanted, and easily manufactured orthopedic de...
In this project, an experiment was conducted in order to examine the effects of vimentin on cellular...
Our mission was to build a new robot for the RoboCup competition. Based on last year’sRoboCup projec...
The objective of this MQP was to reduce PrimetalsÂ’ cycle and setup times for pinions at workstation...
The goal of this project is to reduce the occurrence of non-contact ACL injuries. Through our liter...
Includes bibliographical references (pages 160-161)The canceller proposed is used to detect the pres...
Starting from forming methylammonium lead iodide (MAPI) via hydriodic acid (HI), gamma-butyrolactone...
The utilization of non-heme iron oxo complexes holds promise of a new generation of contaminant reme...
The development of a successful exoskeleton for human performance augmentation (EHPA) will require a...
The scope of the project was to create an ornithopter, a bio-inspired flapping wing mechanism to pro...
The following paper describes the process and results undertaken to create a modular robotic arm sys...
This research investigated the covalent modification of self-assembled monolayers (SAMs) formed on g...
The goal of this design project was to create an optimal fixation system to stabilize the stifle joi...
Rolling contact fatigue (RCF) cracks are a widespread problem that impairs the service life of railw...
Projecte del programa Erasmus elaborat a Salzburg University of Applied SciencesTo understand Virtua...
The goal of this study was to design a safe, easily implanted, and easily manufactured orthopedic de...
In this project, an experiment was conducted in order to examine the effects of vimentin on cellular...
Our mission was to build a new robot for the RoboCup competition. Based on last year’sRoboCup projec...
The objective of this MQP was to reduce PrimetalsÂ’ cycle and setup times for pinions at workstation...
The goal of this project is to reduce the occurrence of non-contact ACL injuries. Through our liter...
Includes bibliographical references (pages 160-161)The canceller proposed is used to detect the pres...
Starting from forming methylammonium lead iodide (MAPI) via hydriodic acid (HI), gamma-butyrolactone...
The utilization of non-heme iron oxo complexes holds promise of a new generation of contaminant reme...
The development of a successful exoskeleton for human performance augmentation (EHPA) will require a...