Hybrids sols from tetraetoxysilane (TEOS) and 3-(methacryloxypropyl) trimethoxysilane (γ-MPS) were prepared in acid medium for different TEOS/γ-MPS ratios and were modified by the addition of a colloidal silica suspension. The stability of the different sols was evaluated by viscosity measurements; the sols showed a Newtonian behaviour and the ageing effect was negligible even after two months from their preparation. Coatings were obtained by dipping at different withdrawal rates and heat-treated between 150 and 250°C. Transparent coatings with thickness higher than 4 μm were reached for most of the studied compositions. The surface microhardness of coatings for each composition and thermal treatment was evaluated by the pencil hardness tes...
A set of materials has been prepared by sol-gel process containing different quantities of hydroxyap...
Scratch resistant silica-based hybrid coatings on polycarbonate substrates were formed by dip-coatin...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
Hybrid coatings were prepared by sol-gel method from sols on the base of TMSPM ((3-(trimethoxysily)p...
A two-step process to synthesize a new type of organic–inorganic hybrid sol, that may be used for a ...
Hybrid sols were prepared from tetraethoxysilane (TEOS), methyltriethoxysilane (MTES) and 3-(methacr...
In this work we present the development of a nanocomposite material composed by silica nanoparticles...
Organic inorganic hybrid coatings were prepared using a commercial triethoxysilane \u3b1,\u3c9 subst...
ABSTRACT: A series of sol-gel derived organic–inor-ganic hybrid coatings consisting of organic epoxy...
ABSTRACT: A series of sol-gel derived organic–inor-ganic hybrid coatings consisting of organic epoxy...
Hybrid sol-gel processing of inorganic-organic nanocomposites has been of a great interest over the ...
Hybrid sol-gel processing of inorganic-organic nanocomposites has been of a great interest over the ...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
This article belongs to the Special Issue Thin and Thick Films: Deposition, Characterization and App...
A set of materials has been prepared by sol-gel process containing different quantities of hydroxyap...
Scratch resistant silica-based hybrid coatings on polycarbonate substrates were formed by dip-coatin...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
Hybrid coatings were prepared by sol-gel method from sols on the base of TMSPM ((3-(trimethoxysily)p...
A two-step process to synthesize a new type of organic–inorganic hybrid sol, that may be used for a ...
Hybrid sols were prepared from tetraethoxysilane (TEOS), methyltriethoxysilane (MTES) and 3-(methacr...
In this work we present the development of a nanocomposite material composed by silica nanoparticles...
Organic inorganic hybrid coatings were prepared using a commercial triethoxysilane \u3b1,\u3c9 subst...
ABSTRACT: A series of sol-gel derived organic–inor-ganic hybrid coatings consisting of organic epoxy...
ABSTRACT: A series of sol-gel derived organic–inor-ganic hybrid coatings consisting of organic epoxy...
Hybrid sol-gel processing of inorganic-organic nanocomposites has been of a great interest over the ...
Hybrid sol-gel processing of inorganic-organic nanocomposites has been of a great interest over the ...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...
This article belongs to the Special Issue Thin and Thick Films: Deposition, Characterization and App...
A set of materials has been prepared by sol-gel process containing different quantities of hydroxyap...
Scratch resistant silica-based hybrid coatings on polycarbonate substrates were formed by dip-coatin...
The paper deals with the analysis of the mechanical characteristics of hybrid coating obtained throu...