This paper reports on experimental and theoretical investigations into the use of optical fiber sensors in the monitoring of civil engineering structures. For this purpose a highly accurate optical fiber deformation sensor based on low coherence interferometry has been developed. This system was conceived in order to monitor a test concrete slab over a period of years. It enabled the measurement of both concrete shrinkage and elastic coefficient in the whole slab with good reproducibility, in agreement with measurements performed on small concrete samples and with theoretical calculations. The thermal effects on the concrete structures are also presented
Structural health monitoring is a key factor in life cycle management of infrastructures. Truly dist...
World-wide a lot of research is carried out concerning the (remote) monitoring of civil engineering ...
The use of Optical Backscatter Reflectometer (OBR) as a distributed fiber optic system to measure st...
An optical-fiber deformation sensor with a resolution of 10 μm and an operational range of 60 mm has...
The majority of structural health monitoring systems is created using spot measurements, aided with ...
Structural health monitoring of civil engineering structures by means of fiber optic sensors is feas...
In modern structures it is desirable to obtain information pertaining to performance, particularly f...
In this paper, the results of distributed strain measurements inside the foundation slab of a high-r...
Abstract: Maintenance and repair of the reinforced concrete structures becomes a very important fiel...
A new bridge construction for the widening of roads on alpine slopes is used in Austria for the firs...
The use of Optical Backscatter Reflectometer (OBR) sensors is a promising measurement technology for...
We present optical fiber sensors to measurement strain and vibration. The sensors are based on fiber...
Monitoring of important structures throughout its working life is normally needed to ensure its perf...
Subject: the results of research of fiber-optic Converter of monitoring system of technical conditio...
A number of studies on the use of optical fibre sensor techniques for structural monitoring are disc...
Structural health monitoring is a key factor in life cycle management of infrastructures. Truly dist...
World-wide a lot of research is carried out concerning the (remote) monitoring of civil engineering ...
The use of Optical Backscatter Reflectometer (OBR) as a distributed fiber optic system to measure st...
An optical-fiber deformation sensor with a resolution of 10 μm and an operational range of 60 mm has...
The majority of structural health monitoring systems is created using spot measurements, aided with ...
Structural health monitoring of civil engineering structures by means of fiber optic sensors is feas...
In modern structures it is desirable to obtain information pertaining to performance, particularly f...
In this paper, the results of distributed strain measurements inside the foundation slab of a high-r...
Abstract: Maintenance and repair of the reinforced concrete structures becomes a very important fiel...
A new bridge construction for the widening of roads on alpine slopes is used in Austria for the firs...
The use of Optical Backscatter Reflectometer (OBR) sensors is a promising measurement technology for...
We present optical fiber sensors to measurement strain and vibration. The sensors are based on fiber...
Monitoring of important structures throughout its working life is normally needed to ensure its perf...
Subject: the results of research of fiber-optic Converter of monitoring system of technical conditio...
A number of studies on the use of optical fibre sensor techniques for structural monitoring are disc...
Structural health monitoring is a key factor in life cycle management of infrastructures. Truly dist...
World-wide a lot of research is carried out concerning the (remote) monitoring of civil engineering ...
The use of Optical Backscatter Reflectometer (OBR) as a distributed fiber optic system to measure st...