An interlaboratory comparison of measurements on three types of commercially available polarisation maintaining fibres was performed in the framework of COST 217. The obtained accuracy and reproducibility for the parameters as the mode field diameter, cutoff wavelength and chromatic dispersion was in the same range for these high birefringent fibres as for the conventional circular single mode fibres. Two setups were tested for the simultaneous determination of the birefringence and modal birefringence. The results characterising the polarisation properties of the fibres are presented in a 6-term Sellmeier expansion of the refractive index
A white light interferometer is developed to measure the distributed polarization coupling in high-b...
A study has been undertaken of the birefringence induced in optical fibres by thermal stress. A new ...
In this paper a technique to perform a distributed measurement of the birefringence of an optical fi...
The birefringence properties of single-mode optical-fibre waveguides are discussed.A fibre birefring...
Single-mode fibres with well-defined polarisation properties are required to interface to integrated...
Two new simple interferometric methods for birefringence measurements are described applying to eith...
Single-mode fibres with controlled polarisation properties are required for many fibre applications....
Starting with concepts of polarisation inherited from bulk optics, the lecture will introduce the co...
Many optical fibre sensors such as interferometers and gyros require the transmission of stable coli...
A simple method for interferometric measurements of chromatic and polarization mode dispersion os si...
SIGLELD:3106.1337(TPRD/L--2236N82). / BLDSC - British Library Document Supply CentreGBUnited Kingdo
Polarisation-maintaining fibres are of considerable interest in the field of optical fibre sensors b...
A new birefringence measurement technique for single-mode optical fibres using a photo-elastic biref...
The polarization properties of single-mode optical fibers are easily modified by environmental facto...
The group birefringence and chromatic dispersion of a polarisation maintaining bow-tie erbium-doped ...
A white light interferometer is developed to measure the distributed polarization coupling in high-b...
A study has been undertaken of the birefringence induced in optical fibres by thermal stress. A new ...
In this paper a technique to perform a distributed measurement of the birefringence of an optical fi...
The birefringence properties of single-mode optical-fibre waveguides are discussed.A fibre birefring...
Single-mode fibres with well-defined polarisation properties are required to interface to integrated...
Two new simple interferometric methods for birefringence measurements are described applying to eith...
Single-mode fibres with controlled polarisation properties are required for many fibre applications....
Starting with concepts of polarisation inherited from bulk optics, the lecture will introduce the co...
Many optical fibre sensors such as interferometers and gyros require the transmission of stable coli...
A simple method for interferometric measurements of chromatic and polarization mode dispersion os si...
SIGLELD:3106.1337(TPRD/L--2236N82). / BLDSC - British Library Document Supply CentreGBUnited Kingdo
Polarisation-maintaining fibres are of considerable interest in the field of optical fibre sensors b...
A new birefringence measurement technique for single-mode optical fibres using a photo-elastic biref...
The polarization properties of single-mode optical fibers are easily modified by environmental facto...
The group birefringence and chromatic dispersion of a polarisation maintaining bow-tie erbium-doped ...
A white light interferometer is developed to measure the distributed polarization coupling in high-b...
A study has been undertaken of the birefringence induced in optical fibres by thermal stress. A new ...
In this paper a technique to perform a distributed measurement of the birefringence of an optical fi...