Doppler Wheel for Emulation of Automotive Radar Target

Automotive radar is an emerging field of research and development. Technological ‎advancements in this field will improve safety for vehicles, pedestrians, and ‎bicyclists, and enable the development of autonomous vehicles. Usage of the ‎Automotive radar is expanding ‎in car and road areas to reduce collisions and ‎accident. Automotive radar ‎developers face a problem to test their radar sensor in ‎the street since there are a lot of interferences ‎signals, noise and unpredicted ‎situations. This thesis provides a part of the solution for this problem by designing a ‎device can demonstrate a different speeds value. This device will help the developer ‎to test their radar sensor inside an anechoic chamber room that provides accurate ‎control of the environmental conditions. This report shows how to ‎build the ‎measuring setup device, step by step to demonstrate the people and vehicle’s speed ‎‎in the street by a Doppler emulator using the wheel for millimetre FWMC radar. ‎Linear speed system needs a large space for testing, but using the rotational wheel ‎allow the developer to test the radar sensor in a small area. It begins with the wheel ‎design specifications and the relation between the ‎rotational speed (RPM) of the ‎wheel and the Doppler frequency. The Doppler ‎frequency is changed by varying the ‎speed of the wheel. Control and power circuit ‎was carefully designed to control the ‎wheel speed accurately. All the measuring ‎setup device parts were assembled in one ‎box. Also, signal processing was done by ‎MATLAB to measure the Doppler frequency ‎using millimetre FMCW radar sensor. ‎The measuring setup device was tested in the ‎anechoic chamber room for different speeds. the ‎manual and automatic tests show ‎good results to measure the different wheel speeds ‎with high accuracy.‎Combined Radar-Based Communication and Interference Mitigation for Automotive ApplicationsEMC Hamme