Thermal Inertia In Residential Buildings For Demand Response

A smart home energy management system has been used to reshape the electricity demand of the residential buildings widely. It normally requires understanding the capability of residential buildings’ thermal mass which revisits to the temperature flatirons and providing enough energy buffers. In this project, phase change material (PCM) was used as the virtual thermal energy storage. Basically, two parts were included: thermal modelling of residential building with PCM layer. Secondly thermal behaviour of models under different conditions (heating, ventilation and air conditioning system, fenestration, solar radiation) is discussed. Some numerical methods for thermal modelling with EnergyPlus are also presented. A conduction finite difference algorithm in EnergyPlus are applied to calculate heat transfer between ambient and zone. The results indicate that PCM layers shift and decreased the indoor temperature during peak period. Also, solar radiation and fenestration can influence its performance. A model that is easily scalable in one thermal zone and convex as a function of the control inputs is derived based on energy balance equations. The indoor temperatures are treated as control inputs together with the cooling energy exchange with the virtual thermal storage. This simplifies the enforcement of comfort, which can be imposed through appropriate constraints on the control inputs. A convex constrained optimization program was formulated to address the optimal energy management, in order to minimize the electricity cost caused by Heating, Ventilation and Air Conditioning unit