Austenitic stainless steel solidify under non-equilibrium conditions, and form two-phase microstructure of austenite and δ-ferrite. Workability of steels in hot are better in the primary crystallization of δ-ferrite. The influence of chemical composition on solid-state formation of delta ferrite phase during hot deformation was investigated. The laboratory prepared austenitic stainless SS2343 steel with the Creq/Nieq index – 1,62 were chosen for this research. The transformation of δ-ferrite during annealing in range 1 050 – 1 250 °C was analyzed. Hot bending test was selected for the evaluation of the initial plasticity of “as cast” SS2343 steel. Bending test of as cast steel plates with volume fraction 12,5 % of δ-ferrite have shown, that...
During planetary hot rolling of 304 austenitic stainless steel, cracks are formed along the plate ed...
The present study develops a logical and novel approach to understand the formation and dissolution ...
The combined effects of the initial microstructure and heating rate on ferrite recrystallization, au...
Austenitic stainless steel solidify under non-equilibrium conditions, and form two-phase microstruct...
A significant fraction of ferrite has been identified in a 321 grade austenitic stainless steel in t...
On different austenitic stainless steels tensile tests were carried out in the hot working temperatu...
DoctorA new concept in steels which are considered by transformation plasticity was recently develop...
The solidification behaviors of laboratory cast austenitic SS2343 stainless steel in terms of the vo...
This work evaluates the effect of co-existence of a large volume fraction of δ-ferrite on the ...
<div><p>Aiming to better understand the effects of heat treatment parameters on Ferrite-Austenite ph...
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Th...
The solidification path and the σ-phase precipitation mechanism in the S31254 (UNS designation) stee...
A series of single compression tests were performed in order to improve the understanding of the inf...
The present paper analyzes UNS S32750 Super-Duplex Stainless Steel hot deformation behavior during p...
O volume e número não são informados no arquivo.Delta ferrite in martensitic stainless steels may ha...
During planetary hot rolling of 304 austenitic stainless steel, cracks are formed along the plate ed...
The present study develops a logical and novel approach to understand the formation and dissolution ...
The combined effects of the initial microstructure and heating rate on ferrite recrystallization, au...
Austenitic stainless steel solidify under non-equilibrium conditions, and form two-phase microstruct...
A significant fraction of ferrite has been identified in a 321 grade austenitic stainless steel in t...
On different austenitic stainless steels tensile tests were carried out in the hot working temperatu...
DoctorA new concept in steels which are considered by transformation plasticity was recently develop...
The solidification behaviors of laboratory cast austenitic SS2343 stainless steel in terms of the vo...
This work evaluates the effect of co-existence of a large volume fraction of δ-ferrite on the ...
<div><p>Aiming to better understand the effects of heat treatment parameters on Ferrite-Austenite ph...
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Th...
The solidification path and the σ-phase precipitation mechanism in the S31254 (UNS designation) stee...
A series of single compression tests were performed in order to improve the understanding of the inf...
The present paper analyzes UNS S32750 Super-Duplex Stainless Steel hot deformation behavior during p...
O volume e número não são informados no arquivo.Delta ferrite in martensitic stainless steels may ha...
During planetary hot rolling of 304 austenitic stainless steel, cracks are formed along the plate ed...
The present study develops a logical and novel approach to understand the formation and dissolution ...
The combined effects of the initial microstructure and heating rate on ferrite recrystallization, au...