The test groups were experimental zirconia, Zirkonzahn zirconia, and Schuetz zirconia. Blocks of partially sintered zirconia were cut into disks (n=20) and then veneered with a feldspathic porcelain. Half of the specimens from each group (n=10) were incubated in 37°C water for 24 hours, and the other half were thermocycled. All the specimens were then subjected to shear testing. The fractured areas were analyzed with optical stereomicroscopy and classified as adhesive, cohesive, or an adhesive-cohesive failure. Spectral patterns were examined to detect bands related to the zirconia and feldspathic porcelain phases. The shear strength data were submitted to 2-way ANOVA. Results No significant differences in shear bond strength were observe...
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive m...
AbstractThe constant quest for finding the ultimate esthetic dental restorative material has led to ...
The interfacial interaction of veneering ceramic with zirconia is still not fully understood. This s...
In recent decades, the high strength, high toughness and appealing aesthetics of Yttria-Partially-St...
So far, there is no report regarding the micro-Raman vibrational fingerprint of the bonds between 10...
So far, there is no report regarding the micro-Raman vibrational fingerprint of the bonds between 10...
Purpose: To evaluate the influence of the number of porcelain layers on its cohesive strength and on...
This study analyzed the shear strength and fracture characteristics of the interface between zirconi...
This study evaluated the bond strength of veneering porcelain with an experimental conditioner-coate...
The interface between yttrium oxide partially stabilized tetragonal zirconia polycrystalline (Y-TZP)...
Ce travail de thèse est une approche originale de la compréhension des mécanismes physico-chimiques ...
Objective: This study evaluated the bond strengths of four different margin ceramics based on fluoro...
This study analyzed the shear strength and fracture characteristics of the interface between zirconi...
Aim: The aim of the study is to find out the difference between the shear bond strength values and f...
2 - RevueThe mechanical properties, the biocompatibility and the aesthetic aspect make of zirconia a...
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive m...
AbstractThe constant quest for finding the ultimate esthetic dental restorative material has led to ...
The interfacial interaction of veneering ceramic with zirconia is still not fully understood. This s...
In recent decades, the high strength, high toughness and appealing aesthetics of Yttria-Partially-St...
So far, there is no report regarding the micro-Raman vibrational fingerprint of the bonds between 10...
So far, there is no report regarding the micro-Raman vibrational fingerprint of the bonds between 10...
Purpose: To evaluate the influence of the number of porcelain layers on its cohesive strength and on...
This study analyzed the shear strength and fracture characteristics of the interface between zirconi...
This study evaluated the bond strength of veneering porcelain with an experimental conditioner-coate...
The interface between yttrium oxide partially stabilized tetragonal zirconia polycrystalline (Y-TZP)...
Ce travail de thèse est une approche originale de la compréhension des mécanismes physico-chimiques ...
Objective: This study evaluated the bond strengths of four different margin ceramics based on fluoro...
This study analyzed the shear strength and fracture characteristics of the interface between zirconi...
Aim: The aim of the study is to find out the difference between the shear bond strength values and f...
2 - RevueThe mechanical properties, the biocompatibility and the aesthetic aspect make of zirconia a...
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive m...
AbstractThe constant quest for finding the ultimate esthetic dental restorative material has led to ...
The interfacial interaction of veneering ceramic with zirconia is still not fully understood. This s...