The colour stability of acrylic resin denture teeth in beverages was investigated. A spectrophotometer measured the colour (CIE-L*a*b* system) of all specimens after storage in distilled water for 24 h at 37°C (T0). Specimens were then immersed in various beverages. After 15 days (T1) and 30 days (T2), for each material, the mean ∆E values were calculated and compared by two-way ANOVA and Tukey intervals (α=0.05). In the ∆T0T1 period, specimens stored in red wine were significantly discoloured, compared to distilled water (P=0.003). There was no difference between immersion solutions in ∆ET0T2 (P=0.772) and in ∆ET1T2 (P=0.058), and no difference between materials in all immersion periods
Background: Proper function, esthetics, and cost are the prime factors to be considered while select...
Objective: The aim of this study was to evaluate the color stability of a heat polymerized resin, an...
The goals of the present study were to evaluate, in vitro, the staining of different composite resin...
The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beve...
Effect of different solutions on color stability of acrylic resin–based dentures Abstract: The aim o...
Introduction: For dentures, artificial teeth are an important part that allow replacement of lost te...
Introduction: Denture base resin materials get discolored after coming in contact with beverages and...
Introduction: Colour stability of the material is an essential factor that contributes to the select...
Effect of different solutions on color stability of acrylic resin–based dentures Abstract: The aim o...
evaluate the color stability of acrylic and bis-acrylic resins after immersion in 3 staining solutio...
AbstractStatement of the problemSeveral denture base resins providing easier/or faster processing ha...
Three-dimensional printed denture base resins are relatively new materials, and their properties nee...
Background: Regular usage of denture cleansers is recommended in complete denture wearers for effect...
OBJECTIVE: Chemical solutions have been widely used for disinfection of dentures, but their effect o...
Introduction: The purpose of this study was to investigate the effect of flask investment materials ...
Background: Proper function, esthetics, and cost are the prime factors to be considered while select...
Objective: The aim of this study was to evaluate the color stability of a heat polymerized resin, an...
The goals of the present study were to evaluate, in vitro, the staining of different composite resin...
The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beve...
Effect of different solutions on color stability of acrylic resin–based dentures Abstract: The aim o...
Introduction: For dentures, artificial teeth are an important part that allow replacement of lost te...
Introduction: Denture base resin materials get discolored after coming in contact with beverages and...
Introduction: Colour stability of the material is an essential factor that contributes to the select...
Effect of different solutions on color stability of acrylic resin–based dentures Abstract: The aim o...
evaluate the color stability of acrylic and bis-acrylic resins after immersion in 3 staining solutio...
AbstractStatement of the problemSeveral denture base resins providing easier/or faster processing ha...
Three-dimensional printed denture base resins are relatively new materials, and their properties nee...
Background: Regular usage of denture cleansers is recommended in complete denture wearers for effect...
OBJECTIVE: Chemical solutions have been widely used for disinfection of dentures, but their effect o...
Introduction: The purpose of this study was to investigate the effect of flask investment materials ...
Background: Proper function, esthetics, and cost are the prime factors to be considered while select...
Objective: The aim of this study was to evaluate the color stability of a heat polymerized resin, an...
The goals of the present study were to evaluate, in vitro, the staining of different composite resin...