The effect of annealing atmospheres (Atamb, N2 and O2) on the electrical properties of Ba(Ti0.90Zr0.10 )O3:2V (BZT10:2V) ceramics obtained by the mixed oxide method was investigated. X-ray photoelectron spectroscopy (XPS) analysis indicates that oxygen vacancies present near Zr and Ti ions reduce ferroelectric properties, especially in samples treated in an ambient atmosphere (Atamb ). BZT10:2V ceramics sintered in a nitrogen atmosphere showed better dielectric behaviour at room temperature with a dielectric permittivity measured at a frequency of 10 kHz equal to 16800 with dielectric loss of 0.023. Piezoelectric force microscopy (PFM) images reveal improvement in the piezoelectric coefficient by sintering the sample under nitrogen atmosphe...
Dielectric spectroscopy was used in this study to examine polycrystalline vanadium and tungstendoped...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...
The effect of annealing atmospheres (At amb, N2 and O2) on the electrical properties of Ba(Ti0.90Zr0...
Barium zirconium titanate ferroelectric ceramics modified with vanadium Ba(Ti0.90Zr0.10V0.02)O-3 (BZ...
Sintering in a reducing atmosphere, in comparison with sintering in air, greatly improves the electr...
Over the past few years, lead-free relaxor dielectrics have become particularly interesting for indu...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
Ba(Zr0.3Ti0.7)O3 (BZT) ceramics was prepared by using conventional solid state reaction. The effects...
BaTiO3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors...
BaTiO3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors...
Oxygen-deficient BaTiO3-d nanoceramics were prepared by spark plasma sintering. Partially reduced ra...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
Dielectric spectroscopy was used in this study to examine polycrystalline vanadium and tungstendoped...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...
The effect of annealing atmospheres (At amb, N2 and O2) on the electrical properties of Ba(Ti0.90Zr0...
Barium zirconium titanate ferroelectric ceramics modified with vanadium Ba(Ti0.90Zr0.10V0.02)O-3 (BZ...
Sintering in a reducing atmosphere, in comparison with sintering in air, greatly improves the electr...
Over the past few years, lead-free relaxor dielectrics have become particularly interesting for indu...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
Ba(Zr0.3Ti0.7)O3 (BZT) ceramics was prepared by using conventional solid state reaction. The effects...
BaTiO3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors...
BaTiO3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors...
Oxygen-deficient BaTiO3-d nanoceramics were prepared by spark plasma sintering. Partially reduced ra...
The aim of this work was an investigation of structural and electrical properties of sintered barium...
Dielectric spectroscopy was used in this study to examine polycrystalline vanadium and tungstendoped...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...
BZT ceramics was prepared by using fine powder mixture of BaCO3, TiO2 and ZrO2 in the respective mol...