It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and...
The aim of this investigation was to find a suitable pretreatment for the subsequent deposition of D...
Deposition of alumina thin films in the presence of fluorine as a method for reducing thehydrogen in...
The hydrogenated amorphous carbon films (a-C:H) were deposited on p-type Si (100) substrates at diff...
AA 2024 aluminum alloy is widely employed in aeronautic and automobilist industries. Its hardness an...
Thin amorphous carbon films were deposited onto aluminum samples at ambient temperature by ion beam-...
Aluminum and aluminum alloys have become increasingly important due to their low density and good co...
Thin films of amorphous carbon (a-C) are well known for their low intrinsic microporosity. Being sta...
Arc thermal metal spray coating provides excellent corrosion, erosion and wear resistance to steel s...
Continuous fluorinated amorphous carbon (a-C:F) films with low dielectric constants (low-k), relativ...
Methane, tetra-fluoro-methane and mixtures of both gases were ionized by radiofrequency excitation a...
The 2524-T3 aluminium (Al) alloy produced by ALCOA may be used as skin material by the aircraft indu...
It is well known that aluminium alloys are prone to pitting corrosion when they are exposed to a wet...
Abstract – The result of the researches of amor-phous hydrogenated carbon (DLC) films deposi-tion on...
Alumina coatings have been deposited on AA 6082 T6 aluminium alloy (table 1) using a novel technique...
International audienceThe corrosion protection of 304L stainless steel by aluminium oxide coatings d...
The aim of this investigation was to find a suitable pretreatment for the subsequent deposition of D...
Deposition of alumina thin films in the presence of fluorine as a method for reducing thehydrogen in...
The hydrogenated amorphous carbon films (a-C:H) were deposited on p-type Si (100) substrates at diff...
AA 2024 aluminum alloy is widely employed in aeronautic and automobilist industries. Its hardness an...
Thin amorphous carbon films were deposited onto aluminum samples at ambient temperature by ion beam-...
Aluminum and aluminum alloys have become increasingly important due to their low density and good co...
Thin films of amorphous carbon (a-C) are well known for their low intrinsic microporosity. Being sta...
Arc thermal metal spray coating provides excellent corrosion, erosion and wear resistance to steel s...
Continuous fluorinated amorphous carbon (a-C:F) films with low dielectric constants (low-k), relativ...
Methane, tetra-fluoro-methane and mixtures of both gases were ionized by radiofrequency excitation a...
The 2524-T3 aluminium (Al) alloy produced by ALCOA may be used as skin material by the aircraft indu...
It is well known that aluminium alloys are prone to pitting corrosion when they are exposed to a wet...
Abstract – The result of the researches of amor-phous hydrogenated carbon (DLC) films deposi-tion on...
Alumina coatings have been deposited on AA 6082 T6 aluminium alloy (table 1) using a novel technique...
International audienceThe corrosion protection of 304L stainless steel by aluminium oxide coatings d...
The aim of this investigation was to find a suitable pretreatment for the subsequent deposition of D...
Deposition of alumina thin films in the presence of fluorine as a method for reducing thehydrogen in...
The hydrogenated amorphous carbon films (a-C:H) were deposited on p-type Si (100) substrates at diff...