Add to ORKGThe influence of silver additions on the Cu-13 wt. pot. Al alloy hardness was studied for additions in the range 0 to 16 wt. pot Ag. The results indicated a pronounced hardness increase with the silver content and an influence of the quenching temperature. Data obtained from scanning electron microscopy indicated that the formation of silver-rich precipitates, wich change with the quenching temperature, seems to produce the changes on alloys hardness
Thermal analysis and compression tests at room temperature have been carried out for Cu-10 wt.% Al a...
The kinetics of Ag-rich precipitates formation in the Cu-2 wt.% Al alloy with additions of 2, 4, 6, ...
Microalloying trace elements into aluminum alloys have been shown to improve mechanical properties b...
The influence of additions of 1.3, 2.5, 3.8, 5.1, and 6.3 at.% Ag on the aging behavior of the Cu-10...
The effect of 4 mass% Ag addition on the thermal behavior of the Cu-9 mass% Al alloy was studied usi...
The influence of additions of 2, 4, 6, 8, 10 and 12 mass% Ag on the thermal behavior of the Cu-8 mas...
It is shown that strength loss in a 6060 Al-Mg-Si alloy caused by reduction in solute can be compens...
In this work the effect of Ag concentration on the thermal behavior of the Cu-10 mass% Al and Cu-11 ...
Effect of Ag addition on the age-hardening response and precipitate microstructure of the Al-3.0Mg-1...
The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on p...
The influence of additions of 2, 4, 6, 8, 10 and 12 wt.% Ag in the isothermal aging kinetics of the ...
The effect of Cu-addition on age-hardening and precipitation have been investigated by hardness meas...
The effect of Cu-addition on age-hardening and precipitation have been investigated by hardness meas...
It is well known that Cu and Ag addition on Al-Mg₂Si alloy can enhance its mechanical properties due...
Effect of addition of a small amount of copper to Al- 12mass % Zn binary alloy on the process of low...
Thermal analysis and compression tests at room temperature have been carried out for Cu-10 wt.% Al a...
The kinetics of Ag-rich precipitates formation in the Cu-2 wt.% Al alloy with additions of 2, 4, 6, ...
Microalloying trace elements into aluminum alloys have been shown to improve mechanical properties b...
The influence of additions of 1.3, 2.5, 3.8, 5.1, and 6.3 at.% Ag on the aging behavior of the Cu-10...
The effect of 4 mass% Ag addition on the thermal behavior of the Cu-9 mass% Al alloy was studied usi...
The influence of additions of 2, 4, 6, 8, 10 and 12 mass% Ag on the thermal behavior of the Cu-8 mas...
It is shown that strength loss in a 6060 Al-Mg-Si alloy caused by reduction in solute can be compens...
In this work the effect of Ag concentration on the thermal behavior of the Cu-10 mass% Al and Cu-11 ...
Effect of Ag addition on the age-hardening response and precipitate microstructure of the Al-3.0Mg-1...
The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on p...
The influence of additions of 2, 4, 6, 8, 10 and 12 wt.% Ag in the isothermal aging kinetics of the ...
The effect of Cu-addition on age-hardening and precipitation have been investigated by hardness meas...
The effect of Cu-addition on age-hardening and precipitation have been investigated by hardness meas...
It is well known that Cu and Ag addition on Al-Mg₂Si alloy can enhance its mechanical properties due...
Effect of addition of a small amount of copper to Al- 12mass % Zn binary alloy on the process of low...
Thermal analysis and compression tests at room temperature have been carried out for Cu-10 wt.% Al a...
The kinetics of Ag-rich precipitates formation in the Cu-2 wt.% Al alloy with additions of 2, 4, 6, ...
Microalloying trace elements into aluminum alloys have been shown to improve mechanical properties b...