KSr2Nb5O15 is a ferroelectric material. The sintering process of the KSr2Nb5O15 ceramic doped with different amounts of CuO was investigated in this research. It was found that CuO is effective as promoter of the densification process of the KSN ceramic. The developed microstructures were different due to the amount of CuO and secondary phases were observed in the microstructures. However, the results of X - ray diffraction showed that only the tetragonal tungsten bronze (TTB) structure was identified in all the investigated ceramic systems. The thermal behavior of CuO and also of the CuO - KSN phase mixture was investigated by thermal analysis.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP
This paper relates the microstructure, crystallographic structure, ferroelectric, and piezoelectric ...
Solid solution of iron doped potassium strontium niobate with KSr2(FeNb4)O15-Δ stoichiometry was pre...
AbstractDielectric material CaCu3Ti4O12 (CCTO) was prepared by solid state technique. CaCO3, TiO2, a...
The sintering behavior of SnO2-CuO system has been investigated for two preparation methods and as a...
KSr₂Nb₅O15 modified potassium sodium niobate ceramics ((1-x)KNN-xKSN) were fabricated by a pressure-...
This work studies the effects of copper doping on the properties of the (K0.44Na0.52Li0.04)(Nb0.86Ta...
CuO as a sintering additive was utilized to explore a low-temperature sintering of 0.92(Bi1/2Na1/2)T...
CuO as a sintering additivewas utilized to explore a low-temperature sintering of 0.92(Bi1/2Na1/2)Ti...
Compared with the CuO–SnO2 system, there is a lack of experimental evidence of a eutectic liquid pha...
The search for new lead-free piezoelectric materials has been a major goal of many scientists in rec...
The effect of copper oxide (CuO) and manganese oxide (MnO2) co-dopant on the densification behavior ...
The main aim of this study is to lower the reaction and sintering tempera...
3Y-TZP (yttria-doped tetragonal zirconia) and CuO nano powders were prepared by co-precipitation and...
This study reports the effect of copper oxide on the sintering mechanism of Ce0.8Gd0.2O2-δ (GDC) stu...
This paper presents a study of the precipitation of ZnO and CuO crystals during the sintering of Cu-...
This paper relates the microstructure, crystallographic structure, ferroelectric, and piezoelectric ...
Solid solution of iron doped potassium strontium niobate with KSr2(FeNb4)O15-Δ stoichiometry was pre...
AbstractDielectric material CaCu3Ti4O12 (CCTO) was prepared by solid state technique. CaCO3, TiO2, a...
The sintering behavior of SnO2-CuO system has been investigated for two preparation methods and as a...
KSr₂Nb₅O15 modified potassium sodium niobate ceramics ((1-x)KNN-xKSN) were fabricated by a pressure-...
This work studies the effects of copper doping on the properties of the (K0.44Na0.52Li0.04)(Nb0.86Ta...
CuO as a sintering additive was utilized to explore a low-temperature sintering of 0.92(Bi1/2Na1/2)T...
CuO as a sintering additivewas utilized to explore a low-temperature sintering of 0.92(Bi1/2Na1/2)Ti...
Compared with the CuO–SnO2 system, there is a lack of experimental evidence of a eutectic liquid pha...
The search for new lead-free piezoelectric materials has been a major goal of many scientists in rec...
The effect of copper oxide (CuO) and manganese oxide (MnO2) co-dopant on the densification behavior ...
The main aim of this study is to lower the reaction and sintering tempera...
3Y-TZP (yttria-doped tetragonal zirconia) and CuO nano powders were prepared by co-precipitation and...
This study reports the effect of copper oxide on the sintering mechanism of Ce0.8Gd0.2O2-δ (GDC) stu...
This paper presents a study of the precipitation of ZnO and CuO crystals during the sintering of Cu-...
This paper relates the microstructure, crystallographic structure, ferroelectric, and piezoelectric ...
Solid solution of iron doped potassium strontium niobate with KSr2(FeNb4)O15-Δ stoichiometry was pre...
AbstractDielectric material CaCu3Ti4O12 (CCTO) was prepared by solid state technique. CaCO3, TiO2, a...