Parametric analysis of pyrolysis process on the product yields in a bubbling fluidized bed reactor

This paper presents a numerical study of operating factors on the product yields of a fast pyrolysis process in a 2-D standard lab-scale bubbling fluidized bed reactor. In a fast pyrolysis process, oxygen-free thermal decomposition of biomass occurs to produce solid biochar, condensable vapours and non-condensable gases. This process also involves complex transport phenomena and therefore the Euler-Euler approach with a multi-fluid model is applied. The eleven species taking part in the process are grouped into a solid reacting phase, condensable/non-condensable phase, and non-reacting solid phase (the heat carrier). The biomass decomposition is simplified to ten reaction mechanisms based on the thermal decomposition of lignocellulosic biomass. For coupling of multi-fluid model and reaction rates, the time-splitting method is used. The developed model is validated first using available experimental data and is then employed to conduct the parametric study. Based on the simulation results, the impact of different operating factors on the product yields are presented. The results for operating temperature (both sidewall and carrier gas temperature) show that the optimum temperature for the production of bio-oil is in the range of 500–525 °C. The higher the nitrogen velocity, the lower the residence time and less chance for the secondary crack of condensable vapours to non-condensable gases and consequently higher bio-oil yield. Similarly, when the height of the biomass injector was raised, the yields of condensable increased and non-condensable decreased due to the lower residence time of biomass. Biomass flow rate of 1.3 kg/h can produce favourable results. When larger biomass particle sizes are used, the intraparticle temperature gradient increases and leads to more accumulated unreacted biomass inside the reactor and the products’ yield decreases accordingly. The simulation indicated that the larger sand particles accompanied by higher carrier gas velocity are favourable for bio-oil production. Providing a net heat equivalent of 6.52 W to the virgin biomass prior to entering the reactor bed leads to 7.5% higher bio-oil yields whereas other products’ yields stay steady. Results from different feedstock material show that the sum of cellulose and hemicellulose content is favourable for the production of bio-oil whereas the biochar yield is directly related to the lignin content