Novel non-toxic halogen-free flame retardants are replacing traditional flame retardants in polymer and polymer matrix composite structures. In this study, graphene nanosheet (GNS) is investigatedin combination with traditional layered double hydroxide (LDH), layered rare-earth hydroxide (LRH), and phosphorus-based flame retardant (DOPO) to enhance the flame retardancy of epoxy resin. A synergistic flame retardancy effect is achieved in GNS/LDH and GNS/DOPO systems where combined GNS and LDH increased the viscosity of the epoxy melt, and limited the flame propagation through inhibition of dripping. The limiting oxygen index of epoxy increased from 15.9 to 23.6 with addition of 0.5 wt. % each of GNS and LDH. With the addition of 2.5 wt. % of...
A comparative study of epoxy filled graphene oxide (GO) and montmorillonite (MMT) and its combinatio...
This study investigates the thermal stability of an aerospace grade epoxy resin containing a silicat...
Tetraphenyl phosphonium-modified layered silicate (LS) and low-melting phenylsiloxane glass (G) are ...
The effects of graphene nanosheets (GNS) and layered double hydroxides (LDH) on morphology, flame re...
In this paper, the thermal stability and fire retardant behavior of epoxy resin (ER) composites fill...
In this paper, the thermal stability and fire retardant behavior of epoxy resin (ER) composites fill...
The effects of combining 0.1–5 wt % graphene nanoplatelet (GNP) and 3–30 wt % phosphorous flame reta...
It remains a challenge to prepare flame-retardant composites via the addition of a low content of fl...
In this study, a novel copolymer, PbisDOPOMA-POSSMA-GMA (PDPG), containing methacryloisobutyl polyhe...
In this paper, we have reported a facile way to functionalize graphene oxide (GO) via assembling a s...
Various concentrations of graphene nanoplatelets (GNP) i.e. 0.2, 0.4, 0.6, 0.8 and 1.0 wt. % were in...
Abstract A C60-PEI-rGO hybrid was prepared by incorporating the fullerene (C60) on the surface of PE...
The significant fire hazards on the polymer-based thermal interface materials (TIM) used in electron...
In this study, nanoclay I.30E and multiwalled carbon nanotubes (MWCNT) were hybridized with graphene...
From its discovery, graphene has become a very fascinating nanomaterial, thanks to its structure tha...
A comparative study of epoxy filled graphene oxide (GO) and montmorillonite (MMT) and its combinatio...
This study investigates the thermal stability of an aerospace grade epoxy resin containing a silicat...
Tetraphenyl phosphonium-modified layered silicate (LS) and low-melting phenylsiloxane glass (G) are ...
The effects of graphene nanosheets (GNS) and layered double hydroxides (LDH) on morphology, flame re...
In this paper, the thermal stability and fire retardant behavior of epoxy resin (ER) composites fill...
In this paper, the thermal stability and fire retardant behavior of epoxy resin (ER) composites fill...
The effects of combining 0.1–5 wt % graphene nanoplatelet (GNP) and 3–30 wt % phosphorous flame reta...
It remains a challenge to prepare flame-retardant composites via the addition of a low content of fl...
In this study, a novel copolymer, PbisDOPOMA-POSSMA-GMA (PDPG), containing methacryloisobutyl polyhe...
In this paper, we have reported a facile way to functionalize graphene oxide (GO) via assembling a s...
Various concentrations of graphene nanoplatelets (GNP) i.e. 0.2, 0.4, 0.6, 0.8 and 1.0 wt. % were in...
Abstract A C60-PEI-rGO hybrid was prepared by incorporating the fullerene (C60) on the surface of PE...
The significant fire hazards on the polymer-based thermal interface materials (TIM) used in electron...
In this study, nanoclay I.30E and multiwalled carbon nanotubes (MWCNT) were hybridized with graphene...
From its discovery, graphene has become a very fascinating nanomaterial, thanks to its structure tha...
A comparative study of epoxy filled graphene oxide (GO) and montmorillonite (MMT) and its combinatio...
This study investigates the thermal stability of an aerospace grade epoxy resin containing a silicat...
Tetraphenyl phosphonium-modified layered silicate (LS) and low-melting phenylsiloxane glass (G) are ...