Holm oak (Quercus ilex) sapwood was submitted to a hydrothermal treatment and liquid fractions rich in hemicelluloses were obtained. The chemical composition as well as the molar mass were analysed during the experiments. The effect of temperature (130–170 °C) and reaction time (5–220 min) on the conversion and molar mass of the obtained hemicelluloses was investigated. The results were compared to previously published data obtained using Norway spruce. The results show that the extraction rate depends strongly on the wood species used. The maximum yield (approximately 60%) was obtained at 170 °C after 20 min. The molar mass of the hemicelluloses decreased during the extraction due to hydrolysis and the pH of the solution decreased as deace...
Hemicelluloses, the second most abundant polysaccharides in nature after cellulose, can be used for ...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...
A study on hemicellulose extraction from 10 different tree species was performed using a batchwise o...
Hemicelluloses derived from biomass are presently underutilized. In order to develop more profitable...
Hemicelluloses are one of the three main components of spruce wood and constitute about 20% of the w...
Producción CientíficaOptimal conditions for hemicellulose extraction from wooden biomass in a semi-c...
Hot-water extraction of hemicelluloses from wood is a promising technology in the integrated bioref...
Hot-water extraction of hemicelluloses from wood is a promising technology in the integrated biorefm...
Many pulp mills in temperate climates are facing increasing competition from new producers in tropic...
Lignocellulose fractionation is a key biorefinery process that need to be understood. In this work, ...
Extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to othe...
In order to study the detailed water extract of wood components in birch under hydrothermal treatmen...
In order to study the detailed water extract of wood components in birch under hydrothermal treatmen...
An alkali-mediated hydrothermal approach was optimized for partial extraction of high-purity hemicel...
Hemicelluloses, the second most abundant polysaccharides in nature after cellulose, can be used for ...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...
A study on hemicellulose extraction from 10 different tree species was performed using a batchwise o...
Hemicelluloses derived from biomass are presently underutilized. In order to develop more profitable...
Hemicelluloses are one of the three main components of spruce wood and constitute about 20% of the w...
Producción CientíficaOptimal conditions for hemicellulose extraction from wooden biomass in a semi-c...
Hot-water extraction of hemicelluloses from wood is a promising technology in the integrated bioref...
Hot-water extraction of hemicelluloses from wood is a promising technology in the integrated biorefm...
Many pulp mills in temperate climates are facing increasing competition from new producers in tropic...
Lignocellulose fractionation is a key biorefinery process that need to be understood. In this work, ...
Extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to othe...
In order to study the detailed water extract of wood components in birch under hydrothermal treatmen...
In order to study the detailed water extract of wood components in birch under hydrothermal treatmen...
An alkali-mediated hydrothermal approach was optimized for partial extraction of high-purity hemicel...
Hemicelluloses, the second most abundant polysaccharides in nature after cellulose, can be used for ...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecu...