The Cr(III) sorption experiments onto Kappaphycus alvarezii waste biomass were conducted at different pH values (2–6) under the conditions of initial metal concentration of 10–50 mg/L and the chemical compositions of Cr-Cu and Cr-Cd. The Cr(III) sorption capacities were slightly dependent on pH, and the maximum sorption capacity was 0.86 mg/g at pH 3. The sorption capacities increased with increase in the initial metal concentration, whereas it was suppressed by the presence of Cu(II) and Cd(III) in the solution. The Cr(III) sorption equilibrium was evaluated using Langmuir, Freundlich and BET isotherms. The sorption mechanisms were characterised using scanning electron microscopy and Fourier transform infrared spectroscopy. The main mechan...
Cr (VI) is a toxic metal, which belongs to the list of priority pollutants due to its mutagenic and ...
In this study, Laminaria seaweed was used in its protonated form as an effective biosorbent for chro...
The existing techniques for the removal of heavy metals are expensive and frequently inefficient. Th...
The Cr(III) sorption experiments onto Kappaphycus alvarezii waste biomass were conducted at differen...
The potential of the biomass of non‐living water hyacinth roots Eichhornia crassipes, as a biosorben...
In the present investigation, dead bacterium biomass Streptomyces rimosus was used as an inexpensi...
ABSTRACT: In the present investigation, dead bacterium biomass Streptomyces rimosus was used as an i...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal...
Biosorption technology has evoked tremendous interest to manipulate natural resources as an alternat...
AbstractToxic Cr(III) which poses environmental hazard to flora and fauna was efficiently abstracted...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal ...
The world is going through a colossal drinking water scarcity. Unchecked discharge (even at trace le...
Husk of tur dal (Cajanus cajan) was investigated as a new biosorbent for the removal of Fe (III) and...
The adsorption capacity of chromium(III) from synthetic waste water solution by a low cost biomateri...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal ...
Cr (VI) is a toxic metal, which belongs to the list of priority pollutants due to its mutagenic and ...
In this study, Laminaria seaweed was used in its protonated form as an effective biosorbent for chro...
The existing techniques for the removal of heavy metals are expensive and frequently inefficient. Th...
The Cr(III) sorption experiments onto Kappaphycus alvarezii waste biomass were conducted at differen...
The potential of the biomass of non‐living water hyacinth roots Eichhornia crassipes, as a biosorben...
In the present investigation, dead bacterium biomass Streptomyces rimosus was used as an inexpensi...
ABSTRACT: In the present investigation, dead bacterium biomass Streptomyces rimosus was used as an i...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal...
Biosorption technology has evoked tremendous interest to manipulate natural resources as an alternat...
AbstractToxic Cr(III) which poses environmental hazard to flora and fauna was efficiently abstracted...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal ...
The world is going through a colossal drinking water scarcity. Unchecked discharge (even at trace le...
Husk of tur dal (Cajanus cajan) was investigated as a new biosorbent for the removal of Fe (III) and...
The adsorption capacity of chromium(III) from synthetic waste water solution by a low cost biomateri...
The potential to remove Cr (VI) from aqueous solutions through biosorption using the husk of Bengal ...
Cr (VI) is a toxic metal, which belongs to the list of priority pollutants due to its mutagenic and ...
In this study, Laminaria seaweed was used in its protonated form as an effective biosorbent for chro...
The existing techniques for the removal of heavy metals are expensive and frequently inefficient. Th...