Microfluidic Wet Spinning of Core-Sheath Elastomer-Liquid Crystal Fibers

Liquid crystals encapsulated in fibers have a wide variety of applications in sensing. In order to produce these, several methods have been explored. Electrospinning is among the better-known techniques with considerable successes. Only a limited range of polymers, though, has been used for electrospinning with liquid crystal cores, and the process of electrospinning has many obstacles to its utility at an industrial scale. On the other hand, wet-spinning techniques are better suited for industrial applications and are widely used in textile manufacturing, but are not commonly used for coaxial fiber production, especially with the large experimental scales that are difficult to replicate in a standard liquid crystal research laboratory. We therefore propose a method for wet-spinning coaxial core-sheath liquid crystal-filled elastomer fibers using a microfluidic set-up. Based on the flow-focusing method used for the production of liquid crystal shells and emulsions, this technique generates coaxial filaments by pumping a core-sheath flow of a liquid crystal surrounded by a rubbery polymer solution into a co-flowing coagulation bath. The coagulation bath is tuned to quickly extract the elastic polymer solution solvent, leaving behind a dry, continuous fiber. We have employed this method to produce fibers of polybutadiene and polyisoprene containing a core of a liquid crystal, such as 4-cyano-4'-pentylbiphenyl (5CB). Investigations into the choice of polymer solution, i.e. both the polymer and solvents used, will be presented in addition to discussion on parameters affecting the contiguity of the core