A system for controlling the position of a rotating member suspended using a magnetic field includes at least one sensor that is operable to detect the position of the rotating member, the sensor further being operable to generate a position reference signal in response to the detected position. The system also includes a controller in communication with the at least one sensor and being operable to generate an actuator control signal in response to receiving the position reference signal. The controller is operable to introduce a phase lead in the actuator control signal in response to a rotational speed of the rotating member. The system further includes at least one actuator in communication with the controller that is operable to adjust...
Magnetic bearings have recently begun to be employed in rotating machinery for vibration reduction,...
This paper describes a new type of magnetic suspension system using a rotary geared motor and a disk...
This paper presents the magnetic suspension of elongated workpieces by using multiple electromagneti...
A system for controlling the position of a rotating member suspended using a magnetic field includes...
A novel magnetic suspension system with three flux path control modules was developed. The module co...
Abstract- This paper presents a proposition of sliding mode position controller of the magnetic susp...
A novel flux control magnetic suspension system that places control plates beside the magnetic sourc...
Reduction of vibration in passively supported lateral directions by varying stiffness control is dis...
A magnetic bearing system using forces of repulsion between permanent magnets is developed. In the d...
The magnetic suspension and balance system (MSBS) uses magnetic force and moment to precisely contro...
The purpose of this paper is to propose a GSA-tuning IPD control technique for magnetic suspension s...
Although small scale magnetic suspension and balance systems (MSBSs) for wind tunnel use have been i...
[出版社版]A new magnetic suspension system equipped with flux path control mechanisms was proposed in th...
This thesis presents the design, analysis, and experimental testing of systems for non-contact suspe...
A magnetic bearing system using forces of repulsion between permanent magnets was developed. In the ...
Magnetic bearings have recently begun to be employed in rotating machinery for vibration reduction,...
This paper describes a new type of magnetic suspension system using a rotary geared motor and a disk...
This paper presents the magnetic suspension of elongated workpieces by using multiple electromagneti...
A system for controlling the position of a rotating member suspended using a magnetic field includes...
A novel magnetic suspension system with three flux path control modules was developed. The module co...
Abstract- This paper presents a proposition of sliding mode position controller of the magnetic susp...
A novel flux control magnetic suspension system that places control plates beside the magnetic sourc...
Reduction of vibration in passively supported lateral directions by varying stiffness control is dis...
A magnetic bearing system using forces of repulsion between permanent magnets is developed. In the d...
The magnetic suspension and balance system (MSBS) uses magnetic force and moment to precisely contro...
The purpose of this paper is to propose a GSA-tuning IPD control technique for magnetic suspension s...
Although small scale magnetic suspension and balance systems (MSBSs) for wind tunnel use have been i...
[出版社版]A new magnetic suspension system equipped with flux path control mechanisms was proposed in th...
This thesis presents the design, analysis, and experimental testing of systems for non-contact suspe...
A magnetic bearing system using forces of repulsion between permanent magnets was developed. In the ...
Magnetic bearings have recently begun to be employed in rotating machinery for vibration reduction,...
This paper describes a new type of magnetic suspension system using a rotary geared motor and a disk...
This paper presents the magnetic suspension of elongated workpieces by using multiple electromagneti...