Monitoring of remedial works performance on landslide-affected areas through ground- and satellite-based techniques

Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques have repeatedly proved to be an effective tool for built environments monitoring in areas affected by geological hazards. This paper describes how the Coherent Pixel Technique (CPT) approach has been successfully applied to assess the response of an unstable slope to the different phases of remedial works following a landslide event. The CPT technique was performed on 59 COSMO-SkyMed images obtained between May 2011 and August 2016 and centred on the Quercianella settlement (a small hamlet of Livorno municipality, Tuscany, Italy), where the reactivation of a dormant shallow slide had occurred in March 2011 and, hereafter, a geotechnical intervention, designed with the aim of mitigating the risks, has been conducted from August 2013, lasting thirteen months. The time series of CPT results show a deformation pattern with sudden accelerations (up to 21 mm in few months) corresponding to the beginning of the interventions, during which the area has been excavated to install a drainage well, followed by mild decelerations resulting from the stabilization of the area after the conclusion of the works. In particular, the integration of ground-based subsurface monitoring (inclinometers and piezometers) and DInSAR superficial data has provided consistent results for landslide characterization and helped defining the state of activity and the areal distribution of the sliding surface. Moreover, the performance of remedial works in the landslide-affected area has been observed, showing stabilization in the upper part of the hamlet and the ongoing movement in the lower part. The combined monitoring system also led the geotechnical company in charge of remedial works to design further stabilization works in order to preserve buildings and roads in the moving area. Therefore, the integration of remote sensing techniques and in situ instruments represents a timely and cost-efficient solution for intervention works monitoring, opening new perspectives on designing engineering solutions for the stabilization of unstable slopes